Инструкция по эксплуатации Vitek VT-3304 — страница 5

ФорматФормат: Руководство СтраницСтраниц: 8 КатегорияКатегория: Магнитолы ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Vitek VT-3304 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 8
Вперёд
Страница 5
СПЕЦИФИКАЦИЯ Питание

AC 230 В ~ 50 Гц;
DC 9 В UM 1(D) x 6

Частотные диапазоны

FM1 64 88 МГц;
FM2 88 108 МГц;
LW 150 275 КГц;

Выходная мощность

2 Вт х 2

СРОК СЛУЖБЫ МАГНИТОЛЫ НЕ МЕНЕЕ 3 Х ЛЕТ

Tape Deck A will play first then stop automatically at the end of the tape The tape in Deck B will then start and stop automatically at the end of the tape.

• DUBBING A CASSETTE TAPE 1 Slide the Function Switch to select the TAPE. 2 You can choose the high speed copying mode by pressing the Normal or High Speed

Dubbing button.

NOTE:
Hi Speed dubbing recording is approximately 2 times faster than normal speed To ensure continuous recording do not change the dubbing speed while recording. 3 Insert a prerecorded tape into Deck A.

Insert the blank tape into Deck B. Press the PAUSE and RECORD keys on Deck B.

4 Press PLAY on Deck A The PAUSE on Deck B will be released automatically. 5 Press STOP to manually end recording.

• MIC RECORDING A Install a cassette tape B Place FUNCTION SWITCH to “MIC” position C Depress RECORD BUTTON and PLAY BUTTON simultaneously Recording then starts through the BUILT IN CONDENSER MICROPHONE.

D To end recording press the STOP/EJECT BUTTON or it will automatically stop when the cassette runs to the very end.

• RADIO RECORDING A Install a cassette tape B Place FUNCTION SWITCH to "RADIO" position After selecting the desired band and tune the TUNING KNOB to desired broadcast station Then push down RECORD BUTTON and PLAY BUTTON simultaneously.

C After recording the desired broadcast depress the STOP/EJECT BUTTON lightly and then place FUNCTION SWITCH to "TAPE" position in order to listen to the recorded broadcast.

D If you desire to play recorded broadcast please follow the instructions explained in play back section.

ERASURE: When you record over previously recorded tape the original recording is automat ically erased and replaced by this newly recording material.

• HEADPHONE JACK For private listening insert a 3.5mm headphone (not included) into the HEADPHONE JACK. The SPEAKER output is automatically cut off CAUTION: LISTENING AT HIGH POWER FOR ALONG MOMENT COULD DAMAGE USERS'
EARS.

• PRECAUTIONS AND MAINTENANCE A Avoid placing this unit near sources of high temperature such as fireplace or sunlight for long time as this may result in damages to plastic housing or electrical parts inside the unit.

ENGLISH

РУССКИЙ

Vt-3304.qxd 09.07.03 11:50 Page 10
Нашли ошибку?