Инструкция по эксплуатации Vitek VT-1916 — страница 4

TIMER: This fan is equipped with a timer setting from 0.5hr up to 7.5hr 0.5hr for each press (0.5hr 1hr 1.5hr…7.5hr).To activate the timer press the TIMER button on the remote control or the TIMER button on the touch key pad Continue to press the TIMER button to cycle through your setting options NOTE: Timer can be used in conjunction with several other functions.

WIND MODE: This fan enable you to enjoy various wind movements by press the WIND MODE button on the remote control or the touch key pad Press this button first for the NATURAL mode which will imitate breeze by varying the fan speeds between fast and slow Press the MODE button a second time you activate the SLEEP setting which slows the fan speed down and when press the Mode button a 3rd time to return to NORMAL wind NOTE: NORMAL wind mode is the default setting; it will be activated when you turn on the fan.

SWING: To swing the fan head press the button marked SWING on the remote or the SWING button on touch key pad Press a second time to stop swinging.

HEIGHT ADJUSTMENT: Push the height adjustment button at the back of the lower body while another hand gently supports the upper body The upper body will mechan ically glide up or glide down when given slight pressure Release the button to secure the height when desired position is obtained

TILT ADJUSTMENT: To change the tilting angle of the fan head move the fan head to the desired position The detent will automatically secure the angle you desire.

CLEANING/MAINTENANCE INSTRUCTIONS Follow these instructions to correctly and safely care for your SD stand fan Please remember:

- Always unplug the fan before cleaning or disassembling.

- DO NOT allow water to drip on or into the fan motor housing.

- DO NOT use any of the following as a cleaner: gasoline thinner benzene

Fan Blade Cleaning:
STEP 1:

To access the fan blade remove the front grill and securing screw.

STEP 2: Clean the fan blade front and rear grills with a soft moist cloth STEP 3:

Replace blade tighten screw and securely fasten the front grill.

Fan Head Base & Pole Cleaning:
Using a soft moist cloth with or without a mild soap solution carefully clean the fan base pole and head Please use caution around the motor housing area DO NOT allow the motor or other electrical components to be exposed to water.

FAN STORAGE INSTRUCTIONS Your fan can be stored in the off season either partially disassembled or assembled It is important to keep it in a safe dry location.

- If stored disassembled we recommend using the original (or appropriately sized) box.

- If stored assembled or partially assembled remember to protect the fan head from dust.

NOTICE:
1 To avoid malfunction please DO NOT crash the fan during transportation assembly and storage 2 After long time operation the shell temperature will rise slightly This is a normal phenomenon 3 If abnormal noise smell or smoke appears during operation please cut the power immediately and send it to service or qualified personnel for adjustment or repairing

SPECIFICATION Power

55 W

Voltage 220 230 V ~ 50 Hz

Blade diameter

Timer

7,5 Hours

SERVICE LIFE OF THE FAN NOT LESS THAN 5 YEARS

ENGLISH

СХЕМА ВЕНТИЛЯТОРА

УКАЗАНИЯ ПО СБОРКЕ:

A Декоративная накладка решетки

B Передняя решетка

C Гайка лопасти вентилятора

D Лопасть вентилятора

E Монтажное кольцо

F Кольцо решетки

G Задняя решетка

H Вал двигателя

I Кожух двигателя

J Верхний конец стойки

K Нижний конец стойки

L Подставка

M Гайка подставки

РУССКИЙ

1916.qxd 10.12.03 12:03 Page 8