Инструкция по эксплуатации Vitek VT-1825 — страница 5

BAGLESS VACUUM CLEANER

Dear customer!

Thank you for purchasing this VITEK product The technology design function and conformity with quality standards guarantees reliability and convenience in the use of the bagless vacuum cleaner.

The vacuum cleaner is equipped with a HEPA filter (the filter traps dust particles 0.3 micrometers and larger) installed in the dust container.

HEPA filters effectively trap particles like spores ash pollen bacteria and microscopic dust particles This prevents respiratory system irritation among children and people suffering from allergies or asthma or who are especially sensitive to allergens

USAGE INSTRUCTIONS

IMPORTANT SAFETY MEASURES

When using electric home appliances you should always observe standard precautions including the following:

CAREFULLY READ ALL THE INSTRUCTIONS BEFORE USING

THE HOME VACUUM CLEANER

WARNING

To reduce risk of fire electric shock or serious injury:

1 Do not leave the vacuum cleaner unattended when it is plugged into a power outlet Always remove the plug from the outlet when you are not using the vacuum cleaner or before servicing it.

2 To reduce the risk of electric shock do not use the vacuum cleaner outdoors or on wet surfaces.

3 Do not allow children to use the vacuum cleaner as a toy.

Pay special attention when children or handicapped persons are nearby.

4 Regularly check the power cord If you notice any defects in the power cord do not use the device.

5 To replace the power cord or repair the device contact an authorized service center.

6 Use this device only for home cleaning purposes and in accordance with the usage instructions.

7 Do not use the power cord as a carrying handle do not close the door if the power cord passes through the doorway and keep the power cord away from sharp edges or corners Do not run the vacuum over the power cord-you might damage it Keep the power cord away from heat sources 8 Do not pull the cord to unplug the device from the power outlet Instead grasp the plug 9 Do not touch the plug with wet hands.

10 Do not cover the input and output openings Never turn on the device if either of the openings is blocked Remove accumulations of dust lint hair and other trash often to ensure normal suction 11 Keep hair loose clothing fingers and other parts of the body away from the suction openings 12 Always turn the vacuum cleaner off first with the on/off button and only then unplug it from the power outlet.

13 Be especially attentive when vacuuming on stairs.

14 Never use the vacuum cleaner on flammable liquids such as petrol solvents and never use it where such liquids are stored 15 Never use the vacuum cleaner on water or other liquids burning or smoke-emitting cigarettes smoldering ashes or fine dust such as from stucco cement flour or cinder.

This might serious damage the electric motor Note also that such substances are not covered by the warrantee.

16 Do not use the vacuum cleaner without the dust container and filter unit attached.

17 When unwinding the power cord hold the cable in your hands and don't let the plug hit the floor

STORE THE INSTRUCTIONS IN A CONVENIENT PLACE

Description 1 Turbo brush

2 Telescoping tube

3 Flexible hose

4 Dust container

5 On/off button

6 Large ring

7 Main housing

8 Power control

9 Power cord winder

10 Outgoing air filter cover

11 Outgoing filter

17 Universal attachment

18 Attachment for hard-to-reach places

Description of the dust container 12 Top lid with handle for removing the container

13 HEPA-filter self-cleaning handle

14 Filter unit (preliminary mesh screen and main HEPA-filter)

15 Lower part of the container with lid for removing trash

16 Lower container lid latch

SAFETY PRECAUTIONS

If suction power decreases abruptly while cleaning immediately turn off of vacuum cleaner and check the telescoping tube or flexible hose for foreign objects Turn off the vacuum cleaner then unplug it from the power outlet Clear the obstruction and only then proceed with cleaning

• Do not use the vacuum cleaner in the immediate vicinity of very hot surfaces next to ash trays or where flammable liquids are stored.

• Insert the plug into the outlet only with dry hands.

• Before beginning to clean remove sharp objects from the floor to avoid damage to the filter unit.

• When pulling the plug from the outlet always grasp the plug not the power cord.

ASSEMBLING THE VACUUM CLEANER

Completely unpack the vacuum cleaner and check it for damage Factory defects or damage occurring in shipment are covered by the VITEK warranty.

Before turning on the vacuum cleaner make sure that the voltage of the electrical system matches that of the vacuum cleaner.

Always turn off the vacuum cleaner and unplug it from the outlet before changing the brushes/attachments and before performing maintenance on it.

1 Attaching and removing the flexible hose (drawing 4)

Insert the flexible hose (3) into the air opening located on the front of the vacuum cleaner housing Insert the hose until it snaps confirming a proper connection

To remove the flexible hose press the fixation button and disconnect the hose 2 Attaching the extension tubes and brushes

Attach the telescoping extension tube to the flexible hose (drawing 1) Extend the lower part of the telescoping tube to the desired length by pressing the fixation button (drawing 2)

Select the desired attachment: the turbo brush (1) universal attachment (17) or the attachment for hard-to-reach places (18) Attach it to the telescoping extension tube (drawing 3)

ENGLISH

Copy of Vt-1825.qxd 10.02.05 10:36 Page 5