Инструкция по эксплуатации Vitek VT-1802 R — страница 10

For cleaning upholstery mattresses clothes carseats etc it is advisable to use the upholstery nozzle Crevice tool.

Fig.2-D

The crevice tool is ideally suited for cleaning grooves folds pockets and other places which are difficult to reach.

OPERATION When you have selected the appropriate attachments and connected them to the vacuum cleaner:
pull out the required length of supply cord. plug into the mains electrical supply. switch on the appliance by pressure to the foot switch marked Electronic suction control (PSV9981/PSV9961)
The suction power of the appliance can be set with the aid of the electronic suction control Using this you can vary the suction power from low for upholstery curtains and delicate fabrics to full power for carpets The motor power and with it the suction power can be infinitely varied as required by moving the slide Mechanical suction control.

Fig.3

An air regulator is incorporated in the handle of the suction hose The suction power can be varied by moving the slide up and down this is especially useful in situations when the suction power is too strong e.g when the carpet is lifted up and sucked into the nozzle.

DUST-BAG FILTERS AND CHANGING THE FILTERS Filters The filter Plus Compact range is equipped with a filtration system consisting of:
1 double-wall paper dust-bag. 1 motor protection filter(air inlet)
1 Micro Filter Plus to trap dust particles(air outlet). These filters must be replaced at regular intervals in order to ensure troublefree operation of the vacuum cleaner Open the dust container by pressing the release catch and lift the cover Paper dust-bag

Bag full indicator The bag full indicator lets you know that the dustbag should be changed or that there is a blockage in the suction paths Changing the dust-bag Unplug the cleaner from the mains electrical supply Change the dust-bag if the bag full indicator is fully red when the nozzle is :lift-

ENGLISH

i 1802.qxd 25.05.04 13:02 Page 10