Инструкция по эксплуатации Vitek VT-1212 — страница 5

ФорматФормат: Руководство СтраницСтраниц: 10 КатегорияКатегория: Утюги ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Vitek VT-1212 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 10
Вперёд
Страница 5
ТАБЛИЦА ТЕМПЕРАТУР

ярлык вид ткани волокно позиция терморегулятора акрилик синтетика полипропилен полиэтан синтетика ацетатволокно триацетат синтетика полиамид (нейлон)
полиэстер вискоза шелк шелк шерсть шерсть хлопок хлопок лен лен

РУССКИЙ

12 Power ON Light Illuminates to indicate that the iron is connected to the power outlet and the power is turned on 13 Safety Auto Off The iron automatically switches itself off if left in the ironing position (hor izontal) for 30 seconds or in the heel rest position (vertical) for 15 min utes A warning light will illuminate and a warning beep will also sound to alert you that the Auto Off function has been activated.

14 Extra long 3 metre cord with flexible grommet For greater versatility and ease of movement when ironing The flexible grommet protects the cord from fraying.

15 Stable Heel Rest Extra large heel rest keeps the iron stable on the ironing board.

16 Cord Wrap Facility The built in cord wrap facility enables neat and tidy storage of the cord when the iron is not in use.

USING YOUR IRON Before using your iron for the first time remove any adhesive stickers plastic covers or cardboard sleeves from the soleplate Ensure that all adhesive is removed by rubbing the soleplate with a cloth dampened with methylated spirits Fill the water tank and empty the water This will rinse out any foreign par ticles remaining in the watertank from the manufacturing process.

NOTE: When turned on for the first time your new iron may give off vapours for up to 10 minutes This is due to the initial heating of the mate rials used It is safe not detrimental to the performance of the iron and will not reoccur.

Filling the Iron with water Before filling the iron with water ensure the power is turned off and the plug is removed from the power outlet The iron can be filled with water while it is hot. 1 Turn the STEAM/DRY Dial to DRY. 2 Place the iron on its heel and open the water inlet cover. 3 Slowly pour water into the water inlet using the beaker provided until

ENGLISH

Примечание:

На ярлыке означает:

Это изделие нельзя гладить! (эластик)

паровое или сухое паровое или сухое

1212.qxd 03.07.03 16:50 Page 10
Нашли ошибку?