Инструкция по эксплуатации Vitek VT-1208 — страница 5

ФорматФормат: Руководство СтраницСтраниц: 10 КатегорияКатегория: Утюги ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Vitek VT-1208 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 10
Вперёд
Страница 5
•Use for the first time on an old it piece of fabric to ensure the sole plate and water tank are completely clean.

SETTING THE TEMPERATURE First sort Items to be ironed according to the International Textile Care Labelling Code Iron fabrics requiring the coolest temperatures first Work gradually to BE higher temperatures Both the tempera ture dial and most items of laundry have markings corresponding with this code.

- Stand the iron on its heel and turn the temperature dial to mini mum Plug the cord into AN electrical outlet.

- Select the temperature setting required by rotating the tempera ture dial so that the desired setting is aligned with the dial indicator. •The heating indicator light will glow showing that the iron is healing up When it goes out the iron has reached the selected temperature and is ready for use The light will glow and go out as the thermostat maintains the selected temperature.

DRY IRONING Turn the steam selector to position 'DRY' this shuts off the steam flow should there be any water in the tank Select the setting on the temperature dial moat suitable for the fab ric to be ironed Once the temperature has been reached ironing may commence Ensure that there is sufficient water in the water tank if you wish to use the spray facility occasionally while dry ironing If dry ironing for longer than 20 minutes the water tank should be emptied to prevent overheating of any water present.

FILLING WITH WATER

First ensure that the iron is disconnected from the electricity supply before filling with water.

Set the Steam Selector to position "DRY". Open the water filling inlet cover laid the iron flat use the water fill

ENGLISH

РУССКИЙ

На ярлыке означает: изделие нельзя гладить!

(например эластик)

Примечание:

вид ткани синтетика синтетика ацетатволокно триацетат с люрексом полиамид (нейлон)

полиэстер вискоза шелк шерсть шерсть хлопок хлопок лен лен синтетика акрил полипропилен полиэтан волокно позиция терморегулятора ярлык шелк

1208.qxd 03.07.03 16:49 Page 10
Нашли ошибку?