Инструкция по эксплуатации Vitek VT-1204 — страница 5

6 Disconnect the iron from mains supply outlet. 7 When the iron gets cool completely store it vertically in a safe place.

HOW TO FILL WATER 1 Disconnect the iron from mains supply outlet. 2 Release the spray assembly. 3 Fill water through the inlet. 4 Fill up to “Max” level of the water tank.

It is advisable to use demineralized water or distilled water Do not use chemically descaled water or any other liquids for refilling.

SPRAYING This function can be used any time and is not affect any setting. 1 Fill the water tank as described in How to fill water. 2 Aim the nozzle to the garment. 3 Press the spray button Note: It may be necessary to press the spray button a few times to start this function.

CLEANING THE IRON 1 Disconnect the iron from the mains supply outlet. 2 Use a damped cloth or non scratching cleaner to remove any deposits on the sole plate or the cabinets 3 Never use sharp or rough objects to remove the deposits on the sole plate.

4 Never use any abrasive vinegar or descaling agents to clean the iron.

SPECIFICATION Power requirement

230 V ~ 50 Hz

Max power

1400 W

SERVICE LIFE OF THE IRON NOT LESS THAN 3 YEARS

ENGLISH

РУССКИЙ

На ярлыке означает: изделие нельзя гладить!

(например эластик)

Примечание:

вид ткани синтетика синтетика ацетатволокно триацетат с люрексом полиамид (нейлон)

полиэстер вискоза шелк шерсть шерсть хлопок хлопок лен лен синтетика акрил полипропилен полиэтан волокно позиция терморегулятора ярлык шелк

1204.qxd 03.07.03 16:48 Page 10