Инструкция по эксплуатации Vitek VT-1202 — страница 5

4 When the required temperature is reached; pilot light goes off The iron is ready for use.

5 Move the Temperature Dial in anti clockwise direction to

'Min'; the iron is switched off.

6 Disconnect the iron from mains supply outlet. 7 When the iron gets cool completely store it vertically in a safe place.

CLEANING THE IRON 1 Disconnect the iron from the mains supply outlet. 2 Use a damped cloth or non scratching cleaner to remove any deposits on the sole plate or the cabinets

Note:
1 Never use sharp or rough objects to remove the deposits on the sole plate.

2 Never use any abrasive vinegar or descaling agents to clean the iron.

CLEANING THE IRON 1 Disconnect the iron from the mains supply outlet. 2 Use a damped cloth or non scratching cleaner to remove any deposits on the sole plate or the cabinets 3 Never use sharp or rough objects to remove the deposits on the sole plate.

4 Never use any abrasive vinegar or descaling agents to clean the iron.

SPECIFICATION Power requirement

230 V ~ 50 Hz

Max power

1100 W

SERVICE LIFE OF THE IRON NOT LESS THAN 3 YEARS

ENGLISH

РУССКИЙ

На ярлыке означает: изделие нельзя гладить!

(например эластик)

Примечание:

вид ткани синтетика синтетика ацетатволокно триацетат с люрексом полиамид (нейлон)

полиэстер вискоза шелк шерсть шерсть хлопок хлопок лен лен синтетика акрил полипропилен полиэтан волокно позиция терморегулятора ярлык шелк

1202.qxd 03.07.03 16:47 Page 10