Инструкция по эксплуатации TELEFUNKEN TF-LED22S1 — страница 4

Before you start

Before you start

Installation

Wall mounting

For wall mounting the back panel of this unit is equipped with 4 screw holes A wall-mount bracket should be used for wall mounting (the bracket is not included and should be acquired separately) Manufacturer is not responsible for improper mounting resulting in damage of the unit.

Stand installation

Place the LED TV on a solid flat surface

Use soft material to place over the front screen to avoid any damage Then put the slits of the stand onto the fixing elements in the lower part of the unit until a click and fix the two parts by screws as shown below:

as well as the damage to the product.

- Please place the product on a flat surface in a well-ventilated location Keep it away from the burning-light direct sunlight vibration high-temperature and humidity.

• Do not place any vase potted plant cup medicine and any container with water on this product If the liquid is spilt it may cause the fire electric shock or breakdown.

• Do not install it at the place on the strong magnetic field or current field It may cause break down This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf with wheels when installing this product If it moves or is tipped over it may be damaged.

• Do not place any fire source such as candlelight close to this product or place it on this product If it is tipped over or fallen down it may cause damage or fire.

• Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime Keep a space at least 10 cm at above left and right of the TV.

• Please place all the signal cords behind of rear panel.

• Do not overexert or touch the panel when you convey the product Do not transfer the LCD TV up or down display direction.

• Do not transport it with the power cord connected If you move this product with the power cord or the connection cable connected the damaged power cord connection cable or connection terminal may cause the fire the electric shock or breakdown.

• 2 persons or more shall transport the device which is heavier than 18 kg If you drop or tip over the device it can be damaged.

• The temperature of the product’s body becomes a little higher after a long period use This phenomenon indicates that heat exchange in normal working mode thus please do not let children or anyone who is sensitive of temperature to touch.

All images provided herein are schematic drawings and may differ from of real objects.