Инструкция по эксплуатации TELEFUNKEN TF-DVBT201 — страница 4

Table of contents

Connection

Connection

Antenna input • Connect an external DVB-T antenna (cable) connector to the antenna RF IN.

The signal in the block cable antenna can fail to contain DVB-T/T2 signal due to the carrier frequency altered by the cable network operator

RF LOOP output • Connect the output RF LOOP jack to TV's antenna input using a special adapter (not included) for supplying an analog TV signal.

HDMI-out • If your TV has an HDMI video output connect it to an HDMI output of this unit using a special HDMI cable (not included).

Coaxial output • Connect the coaxial digital audio output to the input of an amplifier to transmit the audio signal to the amplifier using a special coaxial cable (not included).

Stereo audio output • Connect the left (white) and right (red) terminal of the stereo audio output to the corresponding audio inputs on your TV using the supplied RCA-type cable.

Composite video (CVBS) output • Connect the yellow video output to the composite video input on your TV using the included RCA cable for transmitting the composite video signal.

Component video output • Connect the component video output to component video input on your TV using a special cable (not supplied) to send component video signal.