Инструкция по эксплуатации Teka TL-2000 — страница 3

ФорматФормат: Руководство СтраницСтраниц: 7 КатегорияКатегория: Вытяжки ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Teka TL-2000 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 7
Вперёд
Страница 3
English

Dear customer

We congratulate you on your choice We are sure that this modern functional and practical article constructed from highest quality materials will fully meet your requirements

Please read all the sections of this INSTRUCTION MANUAL before using the extractor for the first time to be able to obtain its full performance and to avoid any breakdowns that could arise from its misuse also allowing small problems to be overcome

Keep this manual It will always provide useful information on the extractor and will help other people to use it

Safety Instructions

* Before using the extractor for the first time you must observe the installation and connection instructions. * This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. * Children should be supervised to ensure that they do not play with the appliance. * Never pull the cable to unplug the extractor

* Do not switch on the extractor if the electricity cable is worn or has cuts or if there are signs of deterioration around the control panel. * If the extractor stops working or functions abnormally unplug it from the mains and advise the technical service. * Do not leave gas burning without a pan above it under the hood. * Do not allow grease to accumulate in any part of the extractor especially in the filter as this COULD PRODUCE A FIRE RISK * Do not flambé food under the hood

* Before installing the extractor consult local rules and regulations in force with respect to current standards on air and fumes. * Before connecting the extractor to the mains check that both the voltage and the frequency conform to that shown on the characteristics label of the extractor located inside it. * The cooker hoods provided with plug must preserve it accessible In the opposite way it is necessary to install an omnipolar switch with at least a distance of 3 mm between Line (L) and Neutral (N). * The air must not be discharge into a flue that is used for exhausting fumes from appliances burning gas or other fuels.The room must be provided with appropriate ventilation if the extractor is going to be used at the same time as other food processing equipment not using electrical power. * We recommend the use of gloves and caution when cleaning the inside of the extractor. * Your extractor is designed for domestic use and only for expelling and purifying gases arising from food preparation Its use for any other purpose must be at your own responsibility and may be dangerous. * You should contact the nearest Qualified Technical Assistance Service for any repairs always using original spare parts Repairs and modifications carried out by others could damage the apparatus or cause it to malfunction and risking your safety The manufacturer cannot be held liable for inappropriate use of the apparatus

Description of the apparatus (Fig 1)

Motor controls three speeds

Light switch independent from motor commands

Lighting by means of lamps

Filters located over cooking area easily withdrawn for cleaning

Extractable group that allows a greater gas capture area

Possibility of incorporating activated charcoal filter (Fig 5)

G-H Anti return tabs to be located in the outlet mouth locating their ends in the holes provided (Fig 2)
Нашли ошибку?