Инструкция по эксплуатации Sony PSP-3008 — страница 8

Precautions

• When placing the PSP™ system in a commercially available case turn off the power or put the system in sleep mode Do not use the system while it is in the case Leaving the system on or using it while in a case or covering may cause overheating or may damage the system.

• Put both the PSP™ system and the Remote Control in Hold Mode to help prevent unintended operation.

Use the PSP™ system and accessories according to the instructions in this manual No authorisation for the analysis or modification of the system or the analysis and use of its circuit configurations is provided Disassembling will void the system warranty and may be harmful The LCD screen in particular contains dangerous high-voltage parts and the laser beam for reading UMD

may cause visual impairment if exposed directly to the eyes.

When using the PSP™ system's "Scan" function to select a wireless LAN access point access points that are not intended for public use may be displayed Only connect to a personal access point that you are authorised to use or one that is available through a public wireless LAN or hotspot service.

When travelling note any applicable wireless regulations.

If the PSP™ system or UMD

is brought directly from a cold location to a warm one moisture may condense on the lens inside the system or on the UMD

Should this occur the system may not operate properly

In this case remove the UMD

and turn off and unplug the system Do not put the UMD

back in until the moisture evaporates (this may take several hours) If the system still does not operate properly contact the appropriate PSP™ customer service helpline which can be found within every PSP™ format software manual.

• Do not touch the opening on the rear of the disc (recorded surface of the disc) with your fingers.

• Do not allow dust sand foreign objects or other types of dirt to get on the disc.

• If the UMD

becomes dirty gently wipe the exterior and recorded surfaces of the UMD

using a soft cloth Do not use solvents or other chemicals.

• Do not use a UMD

that is cracked or warped or has been repaired

The UMD

may break inside the PSP™ system leading to injury or malfunction.

Cases and coverings

Never disassemble the system or accessories

Using the access point

Overseas use

Moisture condensation

handling