Инструкция SMEG SBS63XEDH — страница 7

Инструкция

PDF

2,98 МБ

Холодильники

LeoBook642

Инструкция для SMEG SBS63XEDH на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

6 / 32 EN

Refrigerator / User Guide

3 Installation

3.1. Right place for installation

Contact the Authorized Service for the product's

installation. To ready the product for installation,

see the information in the user guide and make

sure the electric and water utilities are as required.

If not, call an electrician and plumber to arrange

the utilities as necessary.

WARNING: The manufacturer assumes

no responsibility for any damage caused

by the work carried out by unauthorized

persons.

WARNING: The product’s power cable

must be unplugged during installation.

Failure to do so may result in death or

serious injuries!

WARNING: : If the door span is too

narrow for the product to pass, remove

the door and turn the product sideways; if

this does not work, contact the authorized

service.

•SPlacetheproductonaflatsurfacetoavoid

vibration.

•Placetheproductatleast30cmawayfromthe

heater, stove and similar sources of heat and at

least 5 cm away from electric ovens.

•Donotexposetheproducttodirectsunlightor

keep in damp environments.

•Theproductrequiresadequateaircirculationto

function efficiently. If the product will be placed

in an alcove, remember to leave at least 5 cm

distance between the product and the ceiling

and the walls.

•Donotinstalltheproductinenvironmentswith

temperatures below -5°C.

3.2. Attaching the plastic wedges

Use the plastic wedges in the provided with

the product to provide sufficient space for air

circulation between the product and the wall.

To attach the wedges, remove the screws on the

product and use the screws provided with the wedges.

Attach 2 plastic wedges on the ventilation cover

shown as j in the figure.

Скачать «SMEG SBS63XEDH» — 2,98 МБ СкачатьСкачиваний: 0

Инструкция SMEG SBS63XEDH — страница 7

Другие руководства из этой категории