EN 5
INSTALLATION
3 INSTALLATION
The following scheme has to be observed: 3.1 Installation of the built-in group 3.2 Set the hood for recirculation or evacuation 3.2 Connect the hood to the mains supply and ensure that it works properly
3.1 Installation of the fitted group 1 Make a rectangular opening in the base of the overhead cupboard or hood leaving a minimum of 13 mm from the outer edges according to the dimensions indicated in the table
2 Drill a hole into the upper side of the cabinet in accordance with the dimensions of the duct used for both the evacuation and recirculation mode
3 Dismantle the ducting support (version with grill or version with filters) pulling the two pommels A (fig 1) simultaneously: a) Fixing frame with screws:
Fix the fitted group to the hood or cupboard using the self-threading screws (No 8) provided with the accessories (fig 2) b) Rapid fixing with side supports:
The device B is set up to deal with a panel thickness of from 15 mm to 30 mm Insert the group into the opening until the two devices B connect Lock the adjustment screw C until the fitted group adheres tightly to the surface (fig 2)
4 Close the ducting support by pushing and connecting the two pommels A (fig 3). 3.2 Ducting or recirculation fitting 1 Ducting fitting:
a The hood can be ducted to the outside using either a rigid or a flexible Ø 100 or 120 mm duct to be fixed with suitable clamps not provided (fig 2) b If the hood is provided with the charcoal filters fitted the filters should be removed (see par.6.2)
2 Recirculation fitting:
a When used in the recirculation mode the charcoal filters must be fitted into the cooker hood (see par 6.2) b The air is recirculated into the kitchen through the opening located on the upper side of the cabinet or of the hood (fig 3) 3.3 Electrical connection and working test 1 The safety measures 4.2 4.3 and 4.4. 2 Once the electrical connection has been completed check that the worktop illumination motor and speeds work properly.
520 mm
700 mm
Side A
497 mm
677 mm
Side B
259 mm
259 mm
Cooker Hood
Dimensions
Инструкция по эксплуатации Smeg KSEG51 — страница 5
Формат: Руководство
Страниц: 11
Категория: Вентиляторы
Добавил: OLD
Инструкция для Инструкция по эксплуатации Smeg KSEG51 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.
Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.