Инструкция SKIL 8003 LA — страница 9

Инструкция

PDF

3,50 МБ

152

Инструменты / Контрольно-измерительные приборы

MilaДок283

Инструкция для SKIL 8003 LA на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

OTHER APPLICATION EXAMPLES:

removing linoleum and vinyl carpeting

removing carpet tiles made of synthetic bres

removing veneers/applying veneer strips

softening/melting tar, tin, bitumen, wax (use at

nozzle E)

waxing (skis, furniture) (use at nozzle E) ⑫

removing resin

loosening rusty/too tightly fastened metal screws,

nuts and bolts

removing candle wax (do not overheat the

underlying surface)

repairing broken candles/restoring bent candles to

their original shape

• Shrink tting ⑬

- use reector nozzle F or reduction nozzle G

- select a shrink-t tube with a diameter matching that of

the workpiece

- heat the shrink-t tube evenly

OTHER APPLICATION EXAMPLE:

shrink-wrapping

• Soldering water pipes ⑭

This tool is most suitable for working with soft solders

(melting point below 400°)

- use reector nozzle F

- thoroughly clean both joining sections before soldering

- pre-heat both sections and apply soldering wire (do

notuselead-basedsolderingwire)

• Thawing out frozen water pipes ⑮

- use reector nozzle F

- heat the frozen area evenly

! waterpipesareoftendiculttodistinguish

from gas pipes; heating gas pipes is extremely

dangerous – risk of explosion

OTHER APPLICATION EXAMPLES:

thawing out water pipes made of PVC (position I,

max. 70°C)

thawing out frozen car locks (position I, max. 70°C)

(use reduction nozzle G)

defrosting freezers (do not damage the plastic

housing)

thawing out ice-covered steps and pavements

• Shaping plastic tubes

- use reector nozzle F

- ll the tube with sand and seal it at both ends, to avoid

kinking of the tube

- heat the tube evenly by moving it from side to side

OTHER APPLICATION EXAMPLES:

shaping all plastics with a low melting-point

(polyethylene, PVC etc.)

shaping all plastics with a high melting-point (acrylic

glass, Plexiglas etc.)

shaping and bending carpet tiles made of synthetic

bres

shaping and bending of wood (model-building)

• Welding plastics

- the weld seam must be clean and grease-free

- keep welding rod close to weld seam and apply heat,

until the welding rod gets tacky

- remove heat, when weld seam is lled up

OTHER APPLICATION EXAMPLES:

repairing of surfboards, skis and other synthetic

sports goods (use at nozzle E)

welding PVC-materials

smoothening blisters after sticking PVC-labels

connecting garden hoses (use reector nozzle F)

• Drying

! only dry with a low or medium temperature

setting (position I or II) and with an increased

distancebetweenthetoolandtheworkpiece

- drying of paint, varnish, gypsum, mortar and plaster

- drying wet timber prior to lling

- drying thickly applied ller or adhesive quickly

- drying building joints before spraying insulation or

sealant

- drying joints and cracks in boatbuilding

• Cleaning/disinfecting

- disinfecting rabbit hutches, dove cotes, etc. (remove

yourpetrst)

- combatting ant colonies

- combatting woodworms and boring beetles (hold the

tool at an adequate distance from the wood)

- eliminating weeds

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots C ②)

• Never use easy inammable liquids for cleaning the heat

gun in general and the air outlet/nozzle in particular

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol ⑯ will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that this

product is in conformity with the following standards

or standardized documents: EN 60335, EN 61000,

EN 55014, in accordance with the provisions of the

directives 2006/95/EC, 2004/108/EC, 2011/65/EU

Скачать «SKIL 8003 LA» — 3,50 МБ СкачатьСкачиваний: 0

Инструкция SKIL 8003 LA — страница 9

Другие руководства из этой категории