Инструкция SKIL 6940 MK — страница 7

Инструкция

PDF

7,75 МБ

104

Инструменты / Контрольно-измерительные приборы

NikaЧитате

Инструкция для SKIL 6940 MK на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR SCREWDRIVERS

GENERAL

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools with

a rating of 230V or 240V can also be connected to a

220V supply)

• This tool should not be used by people under the age of

16 years

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic (such

as oak and beech dust) especially in conjunction with

additives for wood conditioning; wear a dust mask and

work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Alwaysdisconnectplugfrompowersourcebefore

making any adjustment or changing any accessory

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when the correct accessories are used which can be

obtained from your SKIL dealer

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

BEFORE USE

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

DURING USE

• Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring or its own cord (fasteners

contacting a “live” wire may make exposed metal parts of

the power tool “live” and could give the operator an

electric shock)

• Use suitable detectors to find hidden utility lines or

call the local utility company for assistance (contact

with electric lines can lead to re or electrical shock;

damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

• When working, always hold the tool firmly and take

a secure stance (high reaction torque can briey occur

while driving in and loosening screws)

• Always keep the cord away from moving parts of the tool

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o 4

• Switch locking for continuous use 5

• Speed control for smooth starting 6

• Changing direction of rotation 7

- when not properly set in left/right position, switch A 2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Operating the tool

! only use bits with hexagon shaft

! do not use damaged bits

- push bit to end position in bitholder

- guide screw to screwdriving bit (screw is held in place

by magnetic bit holder)

- rmly push tip of screw into workpiece

- press trigger A and push tool forward to start screwing

or unscrewing

- adjust screwing depth, if necessary

• Adjusting screwing depth 8

- rotate sleeve E clockwise for increasing the screwing

depth

- rotate sleeve E counter-clockwise for reducing the

screwing depth

- always test out rst on a piece of scrap material

• Holding and guiding the tool

! while working, always hold the tool at the

grey-coloured grip area(s) 9

- do not apply too much pressure on the tool; let the tool

do the work for you

- keep ventilation slots H 2 uncovered

• Changing bit holder 0

• Hand strap !

• Belt clip @

Скачать «SKIL 6940 MK» — 7,75 МБ СкачатьСкачиваний: 0

Инструкция SKIL 6940 MK — страница 7

Другие руководства из этой категории