Инструкция по эксплуатации SINGER Talent 3221 — страница 20

Blind Hem

For hems on curtains trousers skirts etc.

Blind hem for stretch fabrics.

Blind hem for firm fabrics.

Set the Stitch Width Dial at a setting appropriate for the weight/type of fabric being sewn within the range shown in the diagram on the right of the page Generally a narrower stitch is used for lighter weight fabrics and a wider stitch is used for heavier weight fabrics Sew a test first to make sure the machine settings are appropriate for the fabric.

Blind Hem:

Set the Stitch Length Dial with the range shown on the diagram at the right Blind hems however are normally sewn with a longer stitch length setting.

Turn up the hem to the desired width and press Fold back (as shown in Fig 1) against the right side of the fabric with the top edge of the hem extending about 7 mm (1/4") to the right side of the folded fabric.

Start to sew slowly on the fold making sure the needle touches slightly the folded top to catch one or two fabric threads (2)

Unfold the fabric when hemming is completed and press.

To make blind hem sewing even easier use a blind hem foot available from your SINGER retailer (See page 6 for part number)

Note: