Инструкция по эксплуатации Saturn ST-PS1246 — страница 3

ФорматФормат: Руководство СтраницСтраниц: 22 КатегорияКатегория: Весы ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Saturn ST-PS1246 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 22
Вперёд
Страница 3
■ To Install Battery

Open the battery case cover at the bottom of scale:

A Take out the used battery with the aid of a sharp object as shown in picture

B Install new battery by putting one side of the battery beneath the battery baffle and then pressing down the other side.

■ LCD Display

■ To Set Weight Unit

If your scale is available (or applicable) in kg/Ib/st you can set to the one you prefer by pressing the unit conversion button

Press the unit conversion button when scale is power off LCD shows current weight unit Press the button again to convert weight unit.

At the bottom of scale you can find a unit conversion button as shown in picture.

After selecting the preferred unit the scale will be auto-off after 3 seconds

Selected weight unit will be activated when the scale is turned on again

When setting lb/st as weight unit the default height unit is feet/inch; When setting kg as weight unit the default height unit is cm.

■ Key Illustration (Touch button)

Turn on the scale and prompt to next parameter (Please refer to the Setting Personal Parameter overleaf)

Advance the value by one interval each press Continuous pressing will speed up the advance of value

Decrease the value by one interval each press Continuous pressing will speed up the decrease of value.

■ Optional Normal Weighing Mode (bypassing parameter setting)

1 Auto step on weighing

2 Consecutive add-on weighing

After digits stabilize more additional loadings can be conducted Ensure each add-on loading has to exceed 2kg to get a new reading

Example: If you want to get a weighing value of your baby you can weigh yourself first and then hold your baby together without stepping off the scale Then you will get the total weight reading Subtracting the previous reading of yourself from the new reading you will get the difference as your baby's weighing value.

■ Fat/Hydration/Muscle

Measuring Mode

1 To set personal parameters

At the first time when you install battery and switch on all default parameters are set as follow:
Нашли ошибку?