Инструкция по эксплуатации Saturn ST-PS0280 — страница 2

BATHROOM SCALES

Dear Buyer!

We congratulate you on having bought the device under trade name “Saturn” We are sure that our devices will become faithful and reliable assistance in your housekeeping.

Avoid extreme temperature changes

Rapid temperature change (e.g when the unit is moved from freezing temperature to a warm room) may cause condensation inside the unit and a malfunction when it is switched on In this case leave the unit at room temperature for at least 1.5 hours before switching it on.

If the unit has been in transit leave it indoors for at least 1.5 hours before starting operation.

OPERATION

Step 1: To make sure accuracy place the scale on a hard flat floor and avoid carpet or soft surface Make sure to put it on hard surface such as marble floor tile etc and make sure no foreign bodies are beneath the scale before weighing.

Step 2: Make sure to put the scale in the light (sunlight or lamplight) and solar power panels are not covered If

LCD does not show a flashing

"0" please turn on the lamp or move the scale to other place with light not less than 70lx The scale will switch on again after 60-90 seconds (the stronger the light is the shorter time it needs).

Step 3:

Enter standby mode LCD shows a flashing

"0".

Step 4: Step onto the scale gently

LCD shows

"—" meaning weighing is proceeding Wait for about 3 seconds until the scale displays weight reading.

Step 5: LCD will show weight reading for about 12 seconds.

CONVERTING WEIGHT UNIT

If the scale is with both measuring system of Metric (kilograms) and

Imperial (pounds stones) you can convert weight unit as follows:

1 Find unit switch on the back of scale.

2 Pull up and down the unit switch to convert scale unit between kg-st-lb.

OVERLOAD INDICATION

Scale overload (max weight capacity is indicated on the scale).

Please step off to avoid damage.

RE-TESTING

Display when you step off the scale means this weight reading with error Please retest.

POWER SUPPLY

1.The scale is solar power supply It can keep working in the light (sunlight or lamplight) LCD shows a flashing