Инструкция по эксплуатации Saturn ST-FP8084 — страница 2

JUICER

Dear Buyer!
We congratulate you on having bought the device under trade name “Saturn” We are sure that our devices will become faithful and reliable assistance in your housekeeping.

Avoid extreme temperature changes Rapid temperature change (e.g when the unit is moved from freezing temperature to a warm room) may cause condensation inside the unit and a malfunction when it is switched on In this case leave the unit at room temperature for at least 1.5 hours before switching it on If the unit has been in transit leave it indoors for at least 1.5 hours before starting operation.

Please read all instructions carefully before using.

Diagram of name and position of main components

1 Pushing bar 2 Transparent cover 3 Juicing net 4 Middle ring 5 Handle 6 Residue barrel 7 Main machine 8 Juicer jug

Attention

1 This machine is unavailable for the weakness unresponsive or psychopathic person (including children) unless under the direction or help from the person who have the responsibility for security Children should be overseen so it can be testified that they are not playing with it. 2 Before using put this machine on a stable and even table board operate according to the above methods. 3 Before juicing first confirm juicing net and rotor clutched in position and no hard contact between juicing net cutter and transparent cover Put the transparent cover on fasten tight the handle then turn on the machine. 4 Before being used the motor works in running-in phase there may be slight peculiar smell and spark this is normal after the motor works for some period the above phenomenon will disappear. 5 During juicing make sure there is not too full juice and residue in the middle seat and residue cup if too full please cut off power supply clean up then use again. 6 During using do not open the cup cover In case power supply is on do not put hand or any ware into the mixing cup or feed port otherwise harmful accident may occur or this machine may be damaged. 7 In order to prolong service life of this machine over-temperature protective device is mounted in the motor If the motor works for a long time or overloaded when over warning temperature power supply will automatically cut off After the