Инструкция по эксплуатации Saturn ST-FP8082 — страница 3

Attention

1 This machine is unavailble for the weakness unresponsive or psychopathic person (including children) unless under the direction or help from the person who have the responsibility for security Children should be overseen so it can be testified that they are not playing with it.

2 Before using put this machine on a stable and even table board operate according to the above methods.

3 Before juicing first confirm juicing net and rotor clutched in position and no hard contact between juicing net cutter and transparent cover Put the transparent cover on fasten tight the handle then turn on the machine.

4 Before being used the motor works in running-in phase there may be slight peculiar smell and spark this is normal after the motor works for some period the above phenomenon will disappear 5 During juicing make sure there is not too full juice and residue in the middle seat and residue cup if too full please cut off power supply clean up then use again.

6 During using do not open the cup cover In case power supply is on do not put hand or any ware into the mixing cup or feed port otherwise harmful accident may occur or this machine may be damaged.

7 In order to prolong service life of this machine over-temperature protective device is mounted in the motor If the motor works for a long time or overloaded when over warning temperature power supply will automatically cut off After the motor stops pull out plug of power supply wait for the motor to cool (about for 30 min) use again.

8 During operating please do not leave never let children operate. 9 When this machine works in mixing mincing or grinding conditions no-loaded or over loaded work is strictly prohibited.

10 After operation do not pour the food out until pull out the plug of power supply. 11 Cutters are very sharp in order to avoid danger when cleaning a cutter please put the cutter under water tap for washing do not wash it with hand.

12 This machine must not be used for others beyond regulated purposes. 13 In case of damaged power supply cord in order to avoid danger replacement must be performed by the manufacturer or its service department or similar professional persons.

Performances

1 For the juicer with large diameter entire apple or pear can be put in for juicing no cutting apart needed easy and quick.

2 Design is fine simple and beautiful with combined structure easy to operate and clean.

3 High speed electric motor with overheating protection is adopted high efficiency time saving energy saving high service life of the motor.

4 Safety lock unit for switching is specially designed in order to make sure safety and reliability in use.

Attention before using

1 This machine is set with safety unit when the handle does not fasten the cover or the cutter seat is not fastened the motor cannot turn so as to ensure safety for the user.

2 When disassembling or assembling the juicer press the upper of feed port of the cover with your hand then force the handle to slide in or out of cover slot.

3 When disassembling juicing net first remove the cover and residue barrel then put up the middle ring by holding juicing nozzle with your hand and take up the juicing net will automatically leave the rotor.

4 In order to avoid damage before using first check power supply for compliance with rated voltage.

5 Clean all parts able to disassemble (refer to the section of "Maintenance and cleaning").

6 When assembling please carefully read the diagram of "Name and position of main components".

7 Please carefully read the "attentions" before using.

Juicing

1 Before using please confirm the button switch of the main machine in stop state in this way in case assembly is not completed starting the main machine can be avoided so unnecessary damage for persons or property avoided.

2 Before juicing first confirm juicing net and rotor clutched in position and no hard contact between juicing net cutter and transparent cover Put the transparent cover on put the handle into the cover slot then turn on the machine.

3 For using assemble according to the diagram of "Name and position of main components" Turn on power supply press switch to let the machine run no-load for 5 sec Put prepared vegetable or fruit into feed port of the juicer press with the pushing bar evenly hard and slowly juice of the vegetable or fruit can be found original fresh good for health.

4 Note: when pressing food with the pushing bar force shall be even or indirect pressing force shall not be more than 1 kg no too sudden force otherwise juicing effect will be reduced.

Operating time

This machine is designed with button switches of O grading 1 grading 2 grading (O for stop 1 for weak grading 2 for strong grading) For juicing select strong grading for operating time after operating for 1min stop for 1min then use again After the above operation is performed for three times stop for 15 min do not operate until the motor is cooled in this way service life of this machine will be prolonged the machine will serve you more efficiently.

Maintenance and cleaning

1 This machine shall be often used so as to keep the motor dry and clean.