Инструкция по эксплуатации Saturn ST-FP0055 — страница 3

3 Close supervision is necessary when any appliance is used by or near children.

4 Unplug from outlet when not in use before putting on or taking off parts and before cleaning.

5 Avoid contacting moving parts 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner Return appliance to the nearest authorized service facility for examination repair or electrical or mechanical adjustment 7 The use of attachments including canning or ordinary jars and processing assembly not recommended by may cause a risk of injury to persons.

8 Blades are sharp Handle carefully.

9 Screw on container bottom firmly

Injury can result if moving blades accidentally become exposed.

10 Always operate blender with cover in place.

11 Always hold jar while processing If the container should turn when the motor is switched ON switch OFF immediately and tighten jar in threaded container bottom.

12 When blending hot liquids remove the feeder cap from the two-piece cover Do not fill blender container beyond the four cup level Always begin processing at the lowest speed setting 13 Do not blend hot liquids in “MINI-

BLENDER” containers.

14 Do not use outdoors.

15 Do not let cord hang over edge of table or counter or touch hot surfaces.

16 Do not leave blender unattended while it is operating.

SAVE THESE INSTRUCTIONS

KNOW YOUR BLENDER

This blender is designed for household use only.

COVER

The cover for your blender consists of two parts the plastic feeder cap (1) and the vinyl cover (2) The cover is selfsealing and is made of vinyl which is resistant to absorption of odours and stains The feeder cap is removable for use as a measuring cap and provides and opening for the addition of other ingredients.

CONTAINER

The 5-cup (1.25 liter) container (3) for the blender is graduated for easy measurement and is molded of heat and cold resistant material The convenient handle and pouring lid permit easy removal of liquid mixtures while thicker mixtures are more easily removed through the bottom opening.

PROCESSING ASSEMBLY

Consists of three parts: (4) as a sealing ring used as a cushion between the container and the agitator; (5) agitator of high-grade stainless steel; (6) a threaded container bottom.

MOTOR AND MOTOR BASE

The powerful three-speed motor is the heart of the appliance and is designed just for this unit It is completely enclosed within the housing (7) The motor uses a “free-floating” feature to reduce noise and wear The powerful food processing motor can be overloaded To 5

avoid this possibility closely follow the instructions and the quantities recommendations in this book.

CARE AND CLEANING OF YOUR

BLENDER

Blender container parts are corrosion resistant sanitary and easily cleaned

Before first use and after every use separate container parts (items 1-6) and clean thoroughly in warm soapy water then rinse and dry well DO NOT

WASH ANY PARTS IN AN AUTOMATIC

DISHWASHER Periodically check all parts before reassembly If the processing blades are stuck or difficult to turn DO NOT USE BLENDER Check by carefully turning the blades in a counterclockwise direction (opposite edges are sharp) Blades should turn freely.

If the glass container is chipped or cracked DO NOT USE BLENDER Further use could result in the container breaking during use.

Use only recommended replacement parts available at an authorized service station.

USE OF DAMAGED OR NON-

RECOMMENDED PARTS COULD RESULT

IN A SEVERE PERSONAL INJURY

AND/OR DAMAGE TO THE BLENDER

See next page for proper container assembly in user instructions.

NEVER IMMERSE THE MOTOR BASE IN

WATER Unplug unit The housing can be cleaned with a damp cloth.

The motor is permanently lubricated and does not require any additional lubrication.

ANY SERVICING SHOULD BE PER-

FORMED BY AN AUTHORIZED SERVICE

FACILITY.

KNOW YOUR BLENDER

CAUTION: Follow these important steps to assemble tighten and mount blender container quickly and correctly INJURY MAY RESULT

IF MOVING BLADES ARE ACCI-

DENTALLY EXPOSED.

ASSEMBLY OF CONTAINER

1 Turn container upside down so the small opening is at the top.

2 Place sealing ring on container opening.

3 Turn the agitator blades upside down and place in mouth of container.

4 Thread container bottom to container

Engage threads properly Screw on firmly.

ASSEMBLY OF MILL

Turn mill upside down and remove blade base.

Place ingredients in Make sure the correct packing is placed properly.

Tightly screw the correct blade base onto container.