Инструкция по эксплуатации Saturn ST-FP0043 — страница 3

¨ This appliance is intended for household use only.

¨ This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

¨ Especially when operating the hand blender attachment in hot liquids do not immerse the blender shaft into-or remove it from the liquid while the appliance is switched on.

Children should be supervised to ensure that they do not play with the appliance. ¨

Children are not allowed to use the appliance without supervision. ¨

Do not touch the blades especially when the appliance is plugged in The blades are very sharp. ¨

If the blades get stuck unplug the appliance before you remove the ingredients that block the blades. ¨

Always unplug the appliance when it is left unattended and before you assemble disassemble clean store change accessories or approach parts that move during use. ¨

Care should be taken when handling the sharp cutting blades emptying the bowl and during cleaning.

Setting the speed When activating switch the processing speed corresponds to the setting of the variable speed regulator The higher the speed setting the faster and finer the chopping results will be For maximum processing speed press the turbo switch You many also use the turbo switch for instant powerful pulses without having to manipulate the speed regulator.

How to operate your hand blender The hand blender is intended for:
blending liquids e.g dairy products sauces fruit juices soups mixed drinks and shakes. mixing soft ingredients e.g.

pureeing cooked ingredients e.g for making baby food. 1.

Attach the blender bar to the motor unit (‘click’). 2.

Immerse the blade guard completely in the ingredients. 3.

Pressing the normal or turbo speed button to switch on the appliance. 4.

Move the appliance slowly up and down and in circles to blend the ingredient.

When blending directly in the saucepan while cooking take the pan from the stove first to protect the appliance from overheating.

How to use you chopper The chopper is intended for chopping meat cheese onions herbs garlic carrots walnuts hazelnuts almonds etc For chopping hard goods use the turbo switch Do not chop extremely hard food such as nutmeg coffee beans and grains.

Before chopping

Pre-cut meat cheese onions garlic carrots chillies.

Remove stalks from herbs un-shell nuts

Remove bones tendons and gristle from meat.

1.Place the blade on the centre pin of the bowl and give it a turn to lock into place.

2.Put the ingredients in the chopper bowl.

3.Put the food processor lid onto the chopper bowl Turn the lid clockwise to lock it.

4.Insert the motor unit into the coupling unit until it locks.

5.Pressing the normal or turbo speed button to switch the appliance.

6.After use press release button to remove the motor unit.

7.Turn the lid anti-clockwise to unlatch it and lift it up.

8.Carefully take out the blade by turning and pulling it before removing the processed food.

Mixing light dough Using the chopper blade you may also mix light dough like a pancake batter or a cake mixture based on up to 250g flour For a pancake batter for instance first pour liquids into the bowl then add flour and finally eggs Pressing the turbo switch mix the batter until smooth.

Slicing/shredding/grinder for potato Use the slicing disc you can slice cucumbers onions mushrooms apples carrots radishes raw potatoes courgettes cabbage Using the shredding disc you can shred apples carrots raw potatoes beetroot cabbage cheese (soft to medium). Use the grinder disc you can grind potato.

1 Place the blade support on the centre pin of the bowl place slicing/shredding/grinder disc into blade support and give it a turn to lock into place.

2 Attach the food processor lid onto the bowl Turn it clockwise to lock the lid. 3 Insert the motor unit into the coupling unit until it locks. 4 Fill the food to be processed into the filling tube Never reach into the filling tube when the appliance is switched on Always use the pusher to feed in food.

5 Pressing the normal or turbo speed button to switch the appliance.

The pusher – tips and warning Do not exert too much pressure on the pusher when you press ingredients down the feed tube There are two kinds of pusher (a small one and a big one) for this appliance:

1.Use the big pusher to push big blocks of ingredients into the processing cup.

2.For slim material (such as ham cucumber carrot etc.) put the material trough the hole of big pusher use the small pusher to push it The small pusher can be taken out of the big pusher by turning it in an anti-clockwise direction.

3.Pre-cut large ingredients to make them fit into the feed tube.

4.Fill the feed tube evenly for the best results.

Whisk The whisk is intended for whipping cream whisking egg whites desserts etc.