Инструкция по эксплуатации Samsung UE55ES8000S — страница 4

English 5

Using the TV's Controller (Panel Key)

The TV's Controller a small joy stick like button on the rear right side of the TV lets you control the TV without the remote control.

The product colour and shape may vary depending on the model.

Remote control sensor

TV Controller

Function menu

Camera

Follow these instructions facing the front of your TV.

When you use a TV camera you should check whether a tape attached or not in rear of the TV camera and then you can use a TV camera after adjust a camera angle If you do not intend to use the TV camera move the camera lens upwards so that the lens is not revealed In this case Face recognition and Motion control are not available.

Power on

Turn the TV on by pressing the Controller when the TV is in standby mode.

Adjusting the volume

Adjust the volume by moving the Controller from side to side when the power is on.

Selecting a channel

Select a channel by moving the Controller upwards and downwards when the power is on.

Using the Function menu

To view and use the Function menu press and release the Controller when the power is on To close the Function menu press and release the Controller again.

Selecting the MENU (

With the Function menu visible select the MENU (

) by moving the Controller to the left The OSD

(On Screen Display) Menu appears Select an option by moving the Controller to the right Move the

Controller to the right or left or backwards and forwards to make additional selections To change a parameter select the it and then press the Controller. additional selections To change a parameter select the it and then press the Controller.

Selecting the SMART HUB (

With the Function menu visible select SMART HUB (

) by moving the Controller upwards The

SMART HUB main screen appears Select an application by moving the Controller and then pressing the Controller.

Selecting a Source (

With the Function menu visible open the Source (

) by moving the Controller to the right The

Source screen appears To select a Source move the Controller back and forth When the source you want is highlighted press the Controller.

Power off (

With the Function menu visible select Power off (

) by moving the Controller downwards and then press the Controller.

To close the Menu Smart Hub or Source press the Controller for more than 1 second.

Standby mode Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power To be safe and to decrease power consumption do not leave your TV in standby mode for long periods of time (when you are away on vacation for example) It is best to unplug the power cord.

Connecting to an Aerial

Plug the power cord into a wall outlet only after you have made all other connections.

If you are connecting your TV to a cable or satellite box using HDMI Component or Composite connections you do not need to connect the ANT IN jack to an aerial or a cable connection.

Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause the TV to malfunction.

Use caution when you move or swivel the TV if the aerial cable is tightly connected You could break the aerial jack off the TV.

VHF/UHF Aerial

Cable

Satellite or

[UE8000-RU]BN68-04061K_X0L04.indb 5

2012-03-20 5:29:02