Инструкция по эксплуатации Samsung PS63B680T6W — страница 9

English

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment.

3 Close the cover.

Remove the batteries and store them in a cool dry place if you won’t be using the remote control for a long time

If the remote control doesn’t work check the following

1 Is the TV power on?
Are the plus and minus ends of the batteries reversed?
3 Are the batteries drained?
4 Is there a power outage or is the power cord unplugged?
5 Is there a special fluorescent light or neon sign nearby?

Using the Remote Control Backlight Buttons

Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly. 1 Press the ON/OFF( ) light button

When

ON the button backlight is turned on for a moment.

Pressing a remote control button when the remote control is on turns the button backlight on for a moment If you touch or move the remote control and the motion is detected by the sensor of the remote control the button backlight will be turned on for a moment Since there is a vibrating device inside the remote control shaking the remote control will result in a sound generated by the device The button backlight will not be turned on when the remote control is turned off.

Switching On and Off

The mains lead is attached to the rear of your set. 1 Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

Press the POWERP button on your set.

You also can press the

POWERP button or the TV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3 Press the numeric button (0~9) or channel up down () button on the remote control or button on your set.

When you switch the set on for the very first time you will be asked to choose language in which the menus are to be displayed.

4 To switch your set off press the POWERP button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal for example). 1 Press the POWERP button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

To switch your set back on simply press the POWERP numeric buttons (0~9) TV button or channel up down () button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday for example) It is best to unplug the set from the mains and aerial.

BN68-02113E-Eng.indb 9

2009-04-09 3:53:57