Инструкция по эксплуатации Samsung PS42B451B2W — страница 17

English 1

Picture Options

PC mode you can only make changes to the Colour Tone Size and Screen

Burn Protection from among the items in Picture Options.

Colour Tone →

→ Cool Normal Warm1 Warm

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected

Picture mode.

Warm1 or Warm is only activated when the picture mode is Movie.

Size

You can select the picture size which best corresponds to your viewing requirements

Auto Wide: Sets the picture in Auto Wide format.

16:: Sets the picture to the 16:9 aspect ratio.

Wide Zoom: Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture vertically.

Zoom: Stretches the 16:9 aspect ratio picture vertically.

4:3: Sets the picture to the 4:3 aspect ratio.

Screen Fit: Displays the full native HD signal that cannot be viewed using a normal TV

The picture size options may vary depending on the input source.

The items available may differ depending on the selected mode.

PC Mode only 16: and 4:3 mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

Wide Zoom: Press the ► button to select Position then press the ENTERE

button

Press the ▲ or ▼ button to move the screen up down Then press the

ENTERE

button

Zoom: Press the ► button to select Position then press the ENTERE

button Press the ▲ or ▼ button to move the picture up and down Then press the

ENTERE

button Press the ► button to select

Size then press the ENTERE

button Press the

▲ or ▼ button to magnify or reduce the picture size in the vertical direction Then press the

ENTERE

button.

After selecting

Screen Fit in HDMI (1080i 1080p) or Component (1080i 1080p) mode: Select Position by pressing the ◄ or ►button Use the ▲ ▼ ◄ or ► button to move the picture

Reset: Press the ◄ or ► button to select Reset then press the ENTERE

button You can initialize the setting.

If you use the

Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function.

You can select these options simply by pressing the

P.SIZE button on the remote control.

Screen Mode

When setting the picture size to

Auto Wide in a 16:9 wide TV you can determine the picture size you want to see the 4:3 WSS

(Wide Screen Service) image or nothing Each individual European country requires different picture size so this function is intended for users to select it.

16:: Sets the picture to the 16:9 aspect ratio.

Wide Zoom: Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture vertically.

Zoom: Stretches the 16:9 aspect ratio picture vertically.

4:3: Selects the screen mode as 4:3.

This function is available in

Auto Wide mode.

This function is not available in

PC Component or HDMI mode.

Digital NR →

→ Off Low Medium High Auto

If the broadcast signal received by your TV is weak you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

When the signal is weak select one of the other options until the best picture is displayed.

HDMI Black Level →

→ Normal Low

You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI (RGB signals).

N N N N N

Continued

Tint (G/R)

: G50/R50

Advanced Settings

Picture Options

Picture Reset

Picture

BN68-01936F-Eng-1.indd 18

2009-02-25 9:19:57