Инструкция по эксплуатации Samsung LE70F96BD — страница 8

english 6

Supported modes for HDMI/DVI and Component

HDMI/DVI 50Hz

HDMI/DVI 60Hz

Component

480i

480p

576i

576p

720p

1080i

1080p

ant In

To view television channels correctly a signal must be received by the set from one of the following sources:

An outdoor aerial A cable television network A satellite network

Common InterFaCe Slot

When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen

The pairing information containing a telephone number CI CARD ID Host ID and other information will be displayed in about 2~3 minutes If an error message is displayed please contact your service provider

When the channel information configuration has finished the message "Updating Completed" is displayed indicating that the channel list is now updated

You must obtain a CI CARD from a local cable service provider

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD

may cause damage to it.

Insert the CI-Card in the direction marked on it.

WISelInK

Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)
7 headphones jack

Headphone may be connected to the headphone output on your set While the head phone is connected the sound from the built-in speakers will be disabled 8

S-VIDeo or VIDeo r-auDIo-l

Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR DVD or

Camcorder

Connect RCA audio cables to "R AUDIO L" on your set and the other ends to corre sponding audio out connectors on the A/V device.

PC In (PC)/(auDIo)

Connect to the video and audio output jack on your PC. 0

DIgItal auDIo out (oPtICal)

Connect to a Digital Audio Component.

When the HDMI IN jacks are connected the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only If you want to hear 5.1 channel audio connect the Optical jack on the

DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater not the TV.

SerVICe

Connect this to the jack on the optional wall mount bracket This will allow you to adjust the TV viewing angle using your remote control

The model LE70F96BD cannot be wall mounted The EX-LINK jack on this model functions as a service jack.

ComPonent In

Connect component video cables (optional) to component connector ("P

" "P

" "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

If you wish to connect both the Set-Top Box and DTV (or DVD) you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P

" "P

" "Y") on your set.

The P

and Y connectors on your component devices (DTV or DVD) are sometimes labeled

Y B-Y and R-Y or Y Cb and Cr.

Connect RCA audio cables (optional) to "R AUDIO L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

Kensington lock (depending on the model)

The Kensington lock (optional) is a device used to physically fix the system when used in a public place

If you want to use a locking device contact the dealer where you purchased the TV

The place of the Kensington Lock may be different depending on its model.

BN68-01313E-01Eng-1006.indd 6

2007-10-06 �� 11:16:35