Инструкция по эксплуатации Samsung LE40M71B — страница 13

English-2

You can select the type of picture which best corresponds to your viewing requirements. 1 Press the menu button to display the menu Press the 5 or 

button to select “Picture” then press the enter button.

2 Press the enter button again to select “Mode”

Press the enter button again.

3 Press the 5 or  button to select the desired picture effect

Press the enter button.

4 Press the exit button to exit.

dynamic: Selects the picture for high-definition in a bright room.

Standard: Selects the picture for optimum display in a normal environment.

movie: Selects the picture for comfortable display in a dark room.

Custom: Select to view your favorite display settings

(Refer to “Adjusting the Custom Picture”)

You can also press the P.mode button on the remote control to select one of the picture settings.

The Picture mode must be adjusted separately for each input source You can return to the factory defaults picture settings by selecting the “Reset”

(Refer to “Resetting the Picture Settings to the Factory Defaults” on page 4)

Changing the Picture Standard

Contrast: Adjusts the lightness and darkness between objects and the background.

Brightness: Adjusts the brightness of the whole screen.

Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

Colour: Adjusts the colours making them lighter or darker

tint (ntSC only): Adjusts the colour of objects making them more red or green for a more natural look.

Your set has several settings which allow you to control picture quality. 1 To select the desired picture effect follow the

“Changing the Picture Standard” instructions number to 4.

2 Press the 5 or  button to select a particular item

Press the enter button.

3 Press the 3 or 4 button to decrease or increase the value of a

particular item Press the enter button.

4 Press the exit button to exit.

adjusting the Custom Picture

The adjusted values are stored according to the selected Picture mode In PC Mode Only “Contrast” “Brightness” and “Colour” can be adjusted

This function is very useful in the situation that the TV is used in a weak signal area LNA amplifies the TV signal in the weak signal area a low-noise preamplifier boosts the incoming signal. 1 Press the menu button to display the menu.

Press the 5 or  button to select “Channel” then press the enter button.

2 Press the 5 or  button to select “LNA” then press the enter button.

3 Select “Off“ or “On“ by pressing the 5 or  button

Press the enter button.

4 Press the exit button to exit.

If the picture is noisy with the LNA set to On select Off LNA setting must be set for each individual channel.

using the lna (low noise amplifier) Feature

BN68-01047B-01Eng.indd 12

2006-07-07 �� 6:50:09