Инструкция по эксплуатации Samsung LE32M87BD — страница 8

english

Connecting an aerial or Cable television network

To view television channels correctly a signal must be received by the set from one of the following sources:

An outdoor aerial A cable television network A satellite network

Connecting CI (Common Interface) CarD

When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen

The pairing information containing a telephone number CI CARD ID Host ID and other information will be displayed in about 2~3 minutes If an error message is displayed please contact your service provider

When the channel information configuration has finished the message "Updating Completed" is displayed indicating that the channel list is now updated

You must obtain a CI CARD from a local cable service provider

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD

may cause damage to it.

Insert the CI-Card in the direction marked on it.

Connecting external a/V Devices

Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR DVD or

Camcorder

Connect RCA audio cables to "R AUDIO L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device

Headphone may be connected to the headphone output (6) on the rear of your set While the head phone is connected the sound from the built-in speakers will be disabled. 8

Connecting Computer

Connect the D Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer

Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer. 9

DIgItal auDIo out (oPtICal)

Connect to a Digital Audio Component. 0

SerVICe

Service connection for qualified service engineer. !

Connecting Component Devices (DtV/DVD)

Connect component video cables (optional) to component connector ("P

" "P

" "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD

If you wish to connect both the Set-Top Box and DTV (or DVD) you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P

" "P

" "Y") on your set.

The P

and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y

B-Y and R-Y or Y Cb and Cr.

Connect RCA audio cables (optional) to "R AUDIO L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

This LCD TV displays its optimum picture resolution in 720p mode.

This LCD TV displays its maximum picture resolution in 1080i mode. @

Kensington lock

The Kensington lock (optional) is a device used to physically fix the system when used in a public place

If you want to use a locking device contact the dealer where you purchased the TV

The place of the Kensington Lock may be different depending on its model.

BN68-01186L-Eng-0523.indd 6

2007-05-23 ¿АИД 1:56:46