Инструкция SAECO RI8329 — страница 14

Тип руководства: Инструкция ФорматФормат: PDF РазмерРазмер: 1,84 МБ СтраницСтраниц: 56 КатегорияКатегория: Приготовление пищи ДобавилДобавил: МаксДок118

Инструкция для SAECO RI8329 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 56
Вперёд
• 14 •
Problem Possible Causes Solution
The machine does not switch on.
The machine is not connected to the electric
network.
Connect the machine to the electric network.
The pump is very noisy. No water in the tank.
Fill the water tank and prime the circuit again
(section 4.5).
No co ee is brewed after pressing
the brew button (16).
Filter holder is clogged.
Press the brew button (16) again. Turn the ma-
chine o and let it cool down (approx. 1 hour).
Then remove and wash the  lter holder thor-
oughly. If the problem persists, contact the au-
thorised service centre.
Co ee is too cold.
The "co ee ready" indicator light (17) was
o when the button was pressed (16)
.
Wait until the "co ee ready" indicator light (17)
turns on.
The  lter holder is not inserted for preheat-
ing (chapter 5).
Preheat the  lter holder.
The cups are cold. Preheat the cups with hot water.
The milk does not froth.
It is not possible to prepare a cap-
puccino.
The milk is not suitable: powdered milk,
low-fat milk.
Use whole milk.
The steam wand is dirty.
Clean the steam wand as described in Chapter
10.
There is no more steam in the boiler.
Prime the circuit (section 4.5) and repeat the
steps described in Chapter 8.
Co ee is brewed too fast, crema
does not form.
There is too little co ee in the  lter holder. Add co ee (chapter 5).
The grind is too coarse. Use a di erent blend (chapter 6).
Co ee is old or not suitable. Use a di erent blend (chapter 6).
Co ee does not come out or drips
only.
No water.
Fill the water tank and prime the circuit again
(section 4.5).
The grind is too  ne. Use a di erent blend (chapter 6).
Co ee tamped in the  lter holder. Shake the ground co ee.
There is too much co ee in the  lter holder. Reduce the quantity of co ee in the  lter holder.
Knob (3) is open. Close the knob (3).
The machine has limescale build-up. Descale the machine (chapter 11).
The  lter in the  lter holder is clogged. Clean the  lter (chapter 10).
Co ee  ows out of the edges.
The  lter holder is not correctly inserted in
the brew unit.
Insert the  lter holder correctly (chapter 5).
The upper rim of the  lter holder is dirty. Clean the rim of the  lter holder.
There is too much co ee in the  lter holder.
Reduce the quantity of co ee using the measur-
ing scoop.
Please contact an authorised service centre for any problems not covered in the above table or when the suggested
solutions do not solve the problem.
12 TROUBLESHOOTING
Скачать «SAECO RI8329» — 1,84 МБ СкачатьСкачиваний: 0
Нашли ошибку?