Инструкция PHILIPS SRP1001 — страница 4

Инструкция

Формат

PDF

Размер

13,77 МБ

Страниц

96

Категория

Пульты ДУ

Добавил

МаксUser19

Инструкция для PHILIPS SRP1001 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

• If the device does not respond at all or not to all of the

key commands, follow the instructions under ‘Setting

the remote control’ or for online setup got to:

www.philips.com/urc.

Setting the remote control

This is only necessary if your TV does not respond to the

SRP 1001. If that is the case, the SRP 1001 does not recognize the

brand and/or model of your TV and you need to program the

remote control to do so. The example below instructs you how to

do this. You can set the remote control either manually or

automatically.

Manually setting the remote control

1 Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2 Look up the brand of your TV in the

code list at the back of this manual.

One or more 3-figure key codes are

shown for each brand.

Note the first code.

3 Keep keys 1 and 3 on the SRP 1001

pressed simultaneously for five

seconds until the indicator light

remains lit.

4 Then enter the code noted in step

2 using the code keys.

– The indicator light will now flash

twice. If the indicator light flashes

once for an extended period, the

code has not been entered properly

or the wrong code has been entered. Start again from step 2.

5 Point the SRP 1001 at the TV and check that it responds as it

should.

– If the TV responds to all of the key commands, the SRP 1001

is ready for use.

Do not forget to note your code.

• If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next

code from the list.

4 EN

5 sec.

2 x

SRP1001_10_Transfer:125254c4_SRU5110_86 19-06-09 15:15 Pagina 4

Скачать «PHILIPS SRP1001» — 13,77 МБ СкачатьСкачиваний: 0

Нашли ошибку?