Инструкция PHILIPS SCD600 — страница 10

Инструкция

PDF

3,20 МБ

180

Для детей

MaxUser708

Инструкция для PHILIPS SCD600 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Do not position the baby unit with the microphone facing downwards. When the microphone

is blocked by the base, the baby unit does not pick up sounds properly.

4 Place the parent unit within the operating range of the baby unit. Make sure it is at least 1

metre/3 feet away from the baby unit to avoid acoustic feedback (Fig. 21).

For more information on the operating range, see section ‘Operating range’ below.



The operating range of the baby monitor is 150 metres/490 feet in open air. Depending on the

surroundings and other disturbing factors, this range may be smaller.

Dry materials Material thickness Loss of range

Wood, plaster, cardboard, glass

(without metal, wires or lead)

< 30cm/12in 0-10%

Brick, plywood < 30cm/12in 5-35%

Reinforced concrete < 30cm/12in 30-100%

Metal grilles or bars < 1cm /0.4in 90-100%

Metal or aluminium sheets < 1cm/0.4in 100%

For wet and moist materials, the range loss may be up to 100%.





You can adjust the loudspeaker volume of the parent unit to the level you prefer.

1 Turn the volume wheel to adjust the volume. (Fig. 14)

Note: If the volume is set to a high level, the parent unit consumes more power.



You can adjust the display brightness of the parent unit to the level you prefer.

1 Press the brightness adjustment buttons on the parent unit to adjust the brightness of the

video display. (Fig. 22)

Note: If the brightness is set to a high level, the parent unit consumes more power.



The parent unit continuously monitors the sound level in your baby’s room and the sound level

lights let you know if there is any activity. If your baby cries, the green sound level lights light up on

the parent unit.

- As long as the baby unit does not detect a sound, all sound level lights on the parent unit are

out.

- When the baby unit picks up a sound, one or more sound level lights on the parent unit go on.

The number of lights that go on is related to the loudness of the sound picked up by the baby

unit. The sound level lights also go on when the parent unit is set to a low volume or when the

automatic screen activation mode is activated (see section ‘Automatic screen activation’

below) (Fig. 23).

10

Скачать «PHILIPS SCD600» — 3,20 МБ СкачатьСкачиваний: 0

Инструкция PHILIPS SCD600 — страница 10

Другие руководства из этой категории