Инструкция PHILIPS SCD525 — страница 17

Инструкция

PDF

3,01 МБ

252

Для детей

LeoReader9

Инструкция для PHILIPS SCD525 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Why does the LINK light on the parent unit

light up red continuously and why is the message

‘Searching’ shown on the display?

• The baby unit and the parent unit are out

of range of each other. Move the parent unit

closer to the baby unit.

• The baby unit may be switched off. Switch on

the baby unit.

• The ECO mode is switched on, but the

operating range is too large. Move the parent

unit closer to the baby unit or switch off the

ECO mode.

Whydoesthebatterylightonthebabyunit

ashred?

The non-rechargeable batteries of the baby unit

are running low. Replace the non-rechargeable

batteries or connect the baby unit to the mains

(see chapter ‘Preparing for use’).

Whydoestheparentunitbeep?

• If the parent unit beeps while the LINK light

lights up red continuously and the message

‘Searching’ is shown on the display, the

connection with the baby unit is lost. Move the

parent unit closer to the baby unit.

• If the parent unit beeps and the battery symbol

on the display is empty, the rechargeable

batteries of the parent unit are running low.

Recharge the batteries.

• If you have switched off the volume while

the sound alert is on, the parent unit beeps

whenever the fourth sound level light lights up

because the baby unit has picked up a sound.

• If you have set the room temperature range on

the parent unit and the temperature alert is on,

the parent unit beeps when the temperature

drops below the set level or below 14°C or

when the temperature rises above the set level

or above 35°C.

• The baby unit may be switched off. Switch on

the baby unit.

14 Frequently asked

questions

This chapter lists the questions most frequently

asked about the appliance. If you cannot nd the

answer to your question, contact the Customer

Care Centre in your country.

What is ECO mode? How does this mode help

theenvironment?

• The ECO mode has been developed to enable

you to reduce your energy consumption.

Monitoring your baby from a small distance

requires less power than monitoring your baby

from a large distance. When you monitor your

baby from a small distance, you can activate the

ECO mode. By switching on the ECO mode,

your baby monitor uses less energy and is

therefore more enviornment-friendly.

Whydon’tthepower-onlightofthebabyunit

andtheLINKlightoftheparentunitcomeon

whenIpresstheon/offbuttonsoftheunits?

• Perhaps the batteries of the parent unit are

empty and the parent unit is not in the plugged-

in charger. Insert the small appliance plug into

the charger, put the adapter of the charger

in a wall socket and place the parent unit in

the charger. Then press the on/off button to

establish connection with the baby unit.

• Perhaps the non-rechargeable batteries of the

baby unit are empty and the baby unit is not

connected to the mains. Replace the non-

rechargeable batteries or connect the baby unit

to the mains. Then press the on/off button to

establish connection with the parent unit.

• If the LINK light on the parent unit still does not

start to ash, use the reset function to reset the

units to their default settings.

ENGLISH

Скачать «PHILIPS SCD525» — 3,01 МБ СкачатьСкачиваний: 0

Инструкция PHILIPS SCD525 — страница 17

Другие руководства из этой категории