Добавить

Инструкция PHILIPS SCD520 — страница 14

Инструкция ФорматPDF Размер2,87 МБ Страниц240 КатегорияДля детей ДобавилMiraDoc751

Инструкция для PHILIPS SCD520 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

← Назад
/ 240
Вперёд →
8 Press the OK button to conrm.
, The message ‘Saved’ appears on the display.
Note: If the temperature in the baby’s room drops below or exceeds the set temperature range, the
display of the parent unit is on continuously. This causes the unit to consume more power.

Note: You can only switch the temperature alert on and off in the menu of the parent unit.
Note: If the temperature alert is activated too often, reduce the set minimum temperature and/or
increase the set maximum temperature (see ‘Setting room temperature range’).
If the temperature alert is switched on, the parent unit beeps if the actual room temperature
exceeds the set maximum temperature or drops below the set minimum temperature. In addition,
the backlight of the parent unit display goes on and ‘High’ or ‘Low’ appears on the display. If no
minimum and maximum temperatures have been set, the temperature alert is given when the room
temperature drops below 14°C or rises above 30°C.
1 Select ‘Temperature’ with the + and - buttons.
2 Press the OK button to conrm.
3 Select ‘Alert’ with the + and - buttons.
4 Press the OK button to conrm.
5 If the alert is off, the display shows ‘On?’. Press the OK button to switch on the alert. If the
alert is on, the display shows ‘Off?’. Press the OK button to switch off the alert.
Reset function
This function in the menu of the parent unit allows you to reset both the parent unit and the baby
unit to the default settings at the same time. You can use this function if problems occur that you
cannot solve by following the suggestions in chapter ‘Frequently asked questions’.
1 Select ‘Reset’ with the + and - buttons.
2 Press the OK button to conrm.
, The message ‘Conrm?’ appears on the display of the parent unit.
3 Press the OK button to conrm.
, The parent unit switches off and then switches on again.
, The units have now both been reset to the default factory settings.
Default settings
Parent unit
- Loudspeaker volume: 1
- Microphone sensitivity: 3
- Sound alert: off
- Temperature alert: off
- ‘Temperature low’ alert: 14°C
- ‘Temperature high’ alert: 30°C
Baby unit
- Loudspeaker volume: 3
- Nightlight: off
- Lullaby: 1
ENGLISH14
Скачать «PHILIPS SCD520» — 2,87 МБ СкачатьСкачиваний: 0
Все руководства категории →
Нашли ошибку?