Инструкция PHILIPS 190E1SB — страница 8

Инструкция

Формат

PDF

Размер

1,61 МБ

Страниц

86

Категория

Мониторы

Добавил

MaxДок7542

Инструкция для PHILIPS 190E1SB на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

• Safety and

Troubleshooting

• FAQs

• Common Problems

• Imaging Problems

• Regulatory Information

Troubleshooting

This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips

customer service representative.

Common Problems

Having this problem Check these items

No Picture

(Power LED not lit)

Make sure the power cord is plugged into the power outlet and into the back

of the monitor.

First, ensure that the power button on the front of the monitor is in the OFF

position, then press it to the ON position.

No Picture

(Power LED is Orange)

Make sure the computer is turned on.

Make sure the signal cable is properly connected to your computer.

make sure the monitor cable has no bent pins on the connect side. If yes,

repair or replace the cable.

The Energy Saving feature may be activated

Screen says

Make sure the monitor cable is properly connected to your computer. (Also

refer to the Quick Set-Up Guide).

Check to see if the monitor cable has bent pins.

Make sure the computer is turned on.

AUTO button doesn't function in VGA mode

The auto function is applicable only in VGA-Analog mode. If the result is

not satisfactory, you can do manual adjustments via the OSD menu. Note

that the Auto Function is not applicable in DVI-Digital mode as it is not

necessary.

Imaging Problems

Image is not centered

Press the Auto button.

Adjust the image position using the Phase/Clock of Setup in OSD Main

Controls.

Image vibrates on the screen

Check that the signal cable is properly securely connected to the graphics

board or PC.

Скачать «PHILIPS 190E1SB» — 1,61 МБ СкачатьСкачиваний: 0

Нашли ошибку?