Инструкция PHILIPS 170X4FS — страница 2

Инструкция

PDF

0,98 МБ

Мониторы

АннаЧитате

Инструкция для PHILIPS 170X4FS на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Safety and Troubleshooting Information

•Safety

Precautions

and

Maintenance

• Installation

Locations

• FAQs

• Troubleshooting

• Regulatory

Information

• Other Related

Information

Safety and Troubleshooting Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than those

specified in this documentation may result in exposure to shock,

electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

● Unplug the monitor if you are not going to use it for an extensive period of time.

● Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped

with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based

liquids.

● Consult a service technician if the monitor does not operate normally when you have followed

the instructions in this manual.

● The casing cover should be opened only by qualified service personnel.

● Keep the monitor out of direct sunlight and away from stoves or any other heat source.

● Remove any object that could fall into the vents or prevent proper cooling of the monitor’s

electronics.

● Do not block the ventilation holes on the cabinet.

● Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.

● When positioning the monitor, make sure the power plug and outlet are easily accessible.

● If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds

before attaching the power cable or DC power cord for normal operation.

● To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or

excessive moisture.

● IMPORTANT: Always activate a screen saver program during your application. If a still image in

high contrast remains on the screen for an extended period of time, it may leave an 'after-image'

or 'ghost image' on front of the screen. This is a well-known phenomenon that is caused by the

shortcomings inherent in LCD technology. In most cases, the after-image will disappear

gradually over a period of time after the power has been switched off. Be aware, that the after-

image symptom cannot be repaired and is not covered under warranty.

Consult a service technician if the monitor does not operate normally when the operating instructions

given in this manual have been followed.

RETURN TO TOP OF THE PAGE

Installation Locations

●

file:///D|/My%20documents/dfu/B2C/ENGLISH/170X4/safety/safety.htm (1 of 2) [3/1/2004 6:01:42 PM]

Скачать «PHILIPS 170X4FS» — 0,98 МБ СкачатьСкачиваний: 0

Инструкция PHILIPS 170X4FS — страница 2

Другие руководства из этой категории