Инструкция по эксплуатации Panasonic AW-PH405E — страница 20

ФорматФормат: Руководство СтраницСтраниц: 58 КатегорияКатегория: Мебель ДобавилДобавил: OLD

Инструкция для Инструкция по эксплуатации Panasonic AW-PH405E на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Назад
/ 58
Вперёд
Страница 20
19 (E)

Installation

 Mounting the camera

[Multi-purpose camera AK-HC1500G

When mounting the camera take sufficient care to ensure that the camera will not come off or fall down.

Mount the lens onto the multi-purpose camera

(1) Lenses that can be used

• Use any of the portable lenses which are listed below.

Fujinon

HA18 HA1 HA series

Canon

HJ17e HJ1e series

(2) Lenses that cannot be used

• Do not use the large-sized lenses (with a weight of 5 kg or more and a length of 400 mm or more) with the model numbers which are listed below since when they are mounted on the camera the camera’s overall balance will be upset.

Fujinon

HA4 series

Canon

HJ40 series J5 series

Align the multi-purpose camera with the guide pins and mount it

Change the positions of the guide pins and screws of the camera mounting base as shown in the figure below and then attach the camera mounting base to the rotary arm.

Do not use the rubber piece.

 Tighten up the two mounting screws securely using the tool.

 Just as for a convertible camera change the positions of the guide pins and screws of the camera mounting base as shown in the figure above and then attach the camera mounting base to the rotary arm.

Set the guide pin.

Mount the camera with the mounting screws.

Mounting screws

Mount the camera with the mounting screws.

Set the guide pin.

Mounting screws

For a stand-alone installation

Camera Mounting base

Change the positions of the guide pins.

Change the positions of the camera mounting screws (Change them over to the second row.)

For installation on the ceiling

Camera Mounting base

Change the positions of the guide pins.

Change the positions of the camera mounting screws (Change them over to the third row.)

Note

 The current rating of LENS

I/F () connector is 500 mA (max). Even with the lenses in a series which can be used any lens whose maximum current consumption exceeds 500 mA cannot be used Concerning the maximum current consumption of the lens contact the lens manufacturer.
Нашли ошибку?