10 (E)
ENGLISH
Installation
For a stand-alone installation
Assembling the pan-tilt head
When assembling the pan-tilt head use the Allen key (provided) and screwdriver and secure the head by tightening the screws firmly After mounting the pan-tilt head check there is no play in its installation.
Attaching the camera mounting base
Attach the camera mounting base to the rotary arm using the three mounting screws (M5 mm with flat washers spring washers) provided The installation direction differs depending on how the base is installed.
Attaching the rotary arm
Attach the rotary arm to the rotary head using the four mounting screws (M5 mm with flat washers spring washers)
provided The installation direction differs depending on how the arm is installed.
Camera mounting base
Rotary arm
Rotary head
For installation on the ceiling
Change the guide pin and screw positions as shown in the figure below on the right and then attach the camera mounting base to the rotary arm.
Rotary arm
Camera mounting base
Rotary head
Camera Mounting base
Change the positions of the guide pins.
Change the positions of the camera mounting screws.
Инструкция по эксплуатации Panasonic AW-PH405E — страница 11
Инструкция для Инструкция по эксплуатации Panasonic AW-PH405E на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.
Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.