Инструкция OLYMPUS SZ61 — страница 9

Инструкция

PDF

0,62 МБ

Телескопы / микроскопы / бинокли

ОлегUser39

Инструкция для OLYMPUS SZ61 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

SZ2 series

OPERATION

3-1 Base

Using the Stage Plate

When reflected light illumination is used, the stage plate can be placed

either the white or black surface facing up depending on which side

makes the specimen easier to view.

#To maintain the ESD performance, use the black surface of the SZ2-

SPBW stage plate.

#When transmitted light illumination is used, use the optional SP-C

transparent glass stage plate.

}This operation is intended to facilitate the rotation of the knobs while

preventing spontaneous drop of the microscope body. It is recommended

to set the knob tension to a slightly higher level than the point where

spontaneous drop occurs.

· Hold the left and right focus adjustment knobs @ with both hands, fix the

left knob and rotate the right knob. The rotation tension of the knobs

increases or decreases according to the direction in which the right knob

is rotated.

Adjusting the Interpupillary Distance

(Fig. 3)

While holding the left and right eyepiece sleeves @ with both hands,

look through the eyepieces and adjust for binocular vision until the left

and right fields of view coincide completely.

}The adjustment operation is variable whether the eyepieces use an eye-

piece micrometer disks or not.

Eyepieces without eyepiece micrometer disk

1. Turn the diopter adjustment rings ² of the left and right eyepieces to

positions “0”.

2. Place an easy-to-observe specimen on the stage plate.

3. Set the zoom adjustment knob ³ for the lowest magnification and rotate

the focus adjustment knob | to bring the specimen into focus.

4. Set the zoom adjustment knob ³ for the highest magnification and ro-

tate the focus adjustment knob | to bring the specimen into focus.

5. Set the zoom adjustment knob ³ for the lowest magnification and rotate

the diopter adjustment rings ² of the left and right eyepieces, instead of

the focus adjustment knob, to bring the specimen into focus.

Adjusting the Focus Adjustment Knob Tension

(Fig. 2)

3-2 Microscope Body

Fig. 3

Fig. 4

Fig. 2

(Figs. 4 & 5)

Adjusting the Diopter

(Zoom Confocality Adjustment)

To decrease

Clamp.

To increase

Скачать «OLYMPUS SZ61» — 0,62 МБ СкачатьСкачиваний: 0

Инструкция OLYMPUS SZ61 — страница 9

Другие руководства из этой категории