Инструкция OLYMPUS scan R acquisition — страница 9

Инструкция

PDF

2,93 МБ

Телескопы / микроскопы / бинокли

ОлегДок683

Инструкция для OLYMPUS scan R acquisition на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Acquisition Software Chapter 1 –Introduction 3

liability for any possible errors. We would appreciate reports of any mistakes as well as suggestions or

criticism.

Please refer to the respective hardware component manuals for regulatory compliances.

1.2 Technical Support

If you find any information missing in this manual or you need additional support, please contact an

Olympus specialist directly.

1.3 Safety Precautions

Before operating the screening system, make sure that you have carefully read and understood all

hardware component manuals and the safety precautions found in the respective manuals.

If the optional laboratory workbench is available, please pay attention to close all doors of the

workbench box before starting a screen. If the screening system is delivered with a robot, always take

care to be well off the robots operational range. For safety precautions during operation or teaching of

the robot please refer to the Hamilton handbook. If a collision of the robot with other equipment occurs,

always switch off the robot controller and manually readjust the robot to the init position before

continuing with any system operation.

Do not use the system in other ways than described in this manual.

Do not move yourself into the operational range of the robot while the system is screening.

Pay attention that no liquid enters the system mechanics and electronics when using well plates with

liquid content.

When changing a sample manually, always retract the objective via the ESC button on the right of your

microscope.

Never change the filters of the MT20 without wearing soft gloves.

Скачать «OLYMPUS scan R acquisition» — 2,93 МБ СкачатьСкачиваний: 0

Инструкция OLYMPUS scan R acquisition — страница 9

Другие руководства из этой категории