Инструкция OLYMPUS SC30 — страница 7

Инструкция

PDF

1,81 МБ

Телескопы / микроскопы / бинокли

AnnaReader

Инструкция для OLYMPUS SC30 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Image Acquisition Software getIT

In addition to your camera, you have also received the image acquisition

software getIT. The software offers the basic functions you need to acquire,

view, calibrate, save, load, and print images.

For more complicated tasks, you can connect your camera to a special software

environment for image analysis and management. Olympus offers you a wide

range of imaging system solutions which can be adapted to your individual

needs in many different fields of application in the areas of sciences, industry,

and medicine. They provide you with much more possibilities than getIT as they

enable integrated acquisition, processing, visualization, and analysis of images,

as well as device control, automatization, administration, networking, database

archiving, and the results documentation.

Installation of the software including the camera driver

The following step-by-step instructions outline the principles of a generic instal-

lation. You' ll find more detailed step-by-step instructions in the appendix (see

page 41). They apply for any camera.

1) Close any and all application programs.

2) Place the installation CD into your computer's CD-ROM drive.

" The setup program will start automatically - unless you have deacti-

vated the autorun function. If so, start the setup.exe file via Windows

Explorer with a doubleclick.

3) An installation wizard guides you through the entire software installation.

Simply follow the onscreen instructions and select the relevant entries. Se-

lect the camera you wish to use.

" The TWAIN camera driver which is necessary for using the camera is

installed together with the software.

4) After you have successfully installed your software, you may now connect

your camera to your PC.

" The camera driver is not signed and therefore not used automatically

under your operating system. So you will have to register the camera

driver with your operating system.

5) Doubleclick the getIT program symbol to start the software.

6) Within the image acquisition software click the Set Input button to check to

see if the camera driver has been integrated successfully into the software.

" Your camera driver has been integrated successfully if the camera is

shown in the Set Input dialog box.

" If your camera does not appear in the Set Input dialog box, click the New

Channel button. Select your camera from the Available devices list and

click OK. Your camera driver should now be integrated successfully.

Warning Install the image acquisition software getIT before connecting your camera to

your PC. This is necessary so that the operating system does not install the

wrong TWAIN camera driver. The TWAIN camera driver which is necessary for

using the camera is installed together with the software. See page 13 for more

information about TWAIN.

Скачать «OLYMPUS SC30» — 1,81 МБ СкачатьСкачиваний: 0

Инструкция OLYMPUS SC30 — страница 7

Другие руководства из этой категории