Инструкция OLYMPUS MVX10 — страница 18

Инструкция

Формат

PDF

Размер

1,83 МБ

Страниц

52

Категория

Телескопы / микроскопы / бинокли

Добавил

AnnaUser89

Инструкция для OLYMPUS MVX10 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

14

2

Turning the Burner ON

#The burner should be centered before the first use after it has been

mounted or replaced. (see page 45) When resetting the burner hour

counter, press and hold the reset button until the reading becomes

“0.0”.

Set the main switch of the power supply unit to “ ” (ON). The arc image

of the burner will stabilize in 5 to 10 minutes after the burner is ignited.

}A discharge-type mercury burner may not turn on by the first try due to

the characteristics of the burner. If a burner does not turn on, set the main

switch to “ ” (OFF), wait for 5 to 10 seconds and set the main switch to

“ ” (ON) again.

#To avoid shortening the service life of the burner, do not turn a burner

off for 2 hours after turning it on but use the shutter in this period.

#When turning on a mercury burner that has been turned off, wait for

about 10 minutes after it is turned off, because it cannot be turned

on unless the mercury vapor in the burner has cooled down and

liquefied.

}If the lamp housing is opened while the burner is on, the power supply

stops to ensure safety. In this case, set the main switch to “ ” (OFF) and

wait for more than 10 minutes before retrying to turn it on again. Do not

open the lamp housing unless it has cooled down sufficiently.

3

Opening/Closing the Shutter

(Fig. 7)

}The shutter can be used to close the shutter temporarily when changing

the mirror unit turret or interrupting observation for a short period.

1. When the shutter knob @ is set to “{”, the shutter is engaged to shut off

the excitation light.

2. When the shutter knob @ is set to “¦”, the shutter is disengaged and

opened.

4

Using the Field Iris Diaphragm

(Fig. 8)

}The centering of the field iris diaphragm can be adjusted (see page 45).

}Push in or pull out the field iris diaphragm lever @ as required to prevent

color fading due to fluorescence in parts other than the observed region.

Fig. 7

@

Fig. 8

@

Скачать «OLYMPUS MVX10» — 1,83 МБ СкачатьСкачиваний: 0

Нашли ошибку?