Инструкция OLYMPUS labSens — страница 13

Инструкция

PDF

0,40 МБ

Телескопы / микроскопы / бинокли

IvanReader

Инструкция для OLYMPUS labSens на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Configuring the system

subsequently controlled by the software. In the Acquire > Devices > Device List

dialog box, you select the hardware components that are available on your

microscope.

If you use a preset configuration in the Quick Device Setup dialog box, check in

this step whether the preset hardware components really comply with your

system.

Configuring the interfaces

Use the Interf

aces dialog box to configure the interface between your microscope

or other motorized components, and the PC on which your software runs.

If you use a preset configuration in the Quick Device Setup dialog box, you can

skip this step.

Configuring the specified hardware

Usually vario

us different devices, such as a camera, a microscope and/or a

stage, will belong to your system. Use the Acquire > Devices > Device Settings...

dialog box to configure the connected devices so that they can be correctly

actuated by your software.

Calibrating the system

Whe

n all of the hardware components have been registered with your software

and configured, the functionality of the system is already ensured. However, it's

only really easy to work with the system and to acquire top quality images, when

you have calibrated your software. The detailed information that helps you to

make optimal acquisitions will then be available.

Your software offers a wizard that will help you while you go through the

individual calibration processes. Use the Acquire > Calibrations... command to

start the software wizard.

00159

3.2. Device Settings - Nosepiece

Your software has to know with which objectives your microscope is equipped,

and at which position in the nosepiece each one is fitted. Only then will the

buttons on the Microscope Control toolbar be correctly defined. Then you will find

that every objective has its own button on the toolbar.

Before you make an image acquisition, click the button with the objective in use,

otherwise the image you acquire will not be correctly calibrated. Only on correctly

calibrated images will the scale bar show the correct scale. Also for making

measurements, correctly calibrated images are an essential prerequisite.

When you exchange or add objectives, you must register the new objectives and

their position in the objective revolver with the system.

All of the information in this dialog box will be automatically adopted in the

Properties tool window during the acquisition. You will find this information in the

Microscope group. This information is saved with the image if you save it in the

TIF or VSI image file format. It will be displayed again when the image is loaded.

Quick Device

Setup

Quick Device

Setup

Why must the

nosepiece be

configured?

Documentation of

the microscope

settings during

image acquisition

Скачать «OLYMPUS labSens» — 0,40 МБ СкачатьСкачиваний: 0

Инструкция OLYMPUS labSens — страница 13

Другие руководства из этой категории