Инструкция OLYMPUS IX71 — страница 20

Инструкция

Формат

PDF

Размер

2,18 МБ

Страниц

76

Категория

Телескопы / микроскопы / бинокли

Добавил

ОлегReader

Инструкция для OLYMPUS IX71 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

16

4

Frame Clamping Plate

}This is the module for clamping the microscope frame onto an

anti-vibration platform. The applicable anti-vibration platforms are

the following four models

· 25 mm pitch and 50 mm pitch anti-vibration platforms.

· 1-inch pitch and 2-inch pitch anti-vibration platforms.

For the assembly procedure, see item

10

on page 65.

}

Pressing the option button ² makes it possible to release or close an

external shutter (UNIBLITZ, etc.) To do this, the external shutter be con-

nected to the right side of the frame using a commercially available

BNC cable.

#When the option button is not used, leave the cap attached to it.

4-2 Focusing Block

}Rotating the coarse or fine focus adjustment knob @ toward the front

(in the direction of the arrow) raises the objective and toward the rear

(opposite direction) lowers the objective.

#Always use the rotation tension adjustment ring ² to control the

rotation tension of the coarse adjustment knob.

The tension of the coarse adjustment knob has been pre-adjusted to

optimum tension, but this can be changed as required. Turn the rotation

tension adjustment ring ² in the direction of the arrow to decrease the

knob’s tension and in the opposite direction to increase it.

If the objective lowers by its own weight or the focusing obtained with the

fine adjustment knob is lost soon, the tension is set too low. In this case,

turn the rotation tension adjustment ring in the opposite direction to the

arrow to increase the tension.

5

Option Button (IX71 Only)

(Fig. 8)

Fig. 11

@

²

³

Rotation Direction of the Coarse/

Fine Adjustment Knobs

1

(Fig. 11)

Adjusting the Coarse Adjustment Knob

Tension

2

(Fig. 11)

Скачать «OLYMPUS IX71» — 2,18 МБ СкачатьСкачиваний: 0

Нашли ошибку?