Инструкция NEC MD211G3 — страница 26

Инструкция

PDF

4,27 МБ

Мониторы

OlegUser80

Инструкция для NEC MD211G3 на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

English-24

STAND-ALONE CALIBRATION

Stand alone calibration can recalibrate the display without using a computer by the front sensor or connecting an external

sensor. There are 5 functions in STAND-ALONE CALIBRATION.

• Self Calibration: Calibrates the front sensor based on the USB optical sensor. Alternatively, manually adjust the integrated

front sensor with an external near range luminance sensor reference, which is traceable to a primary standards laboratory.

• Copy Calibration: Copies the luminance from one display to one or more additional displays.

• Gamma Adjust: Adjusts Gamma value.

• DICOM Measurement: Measures DICOM response.

• AMBIENT SENSOR CALIBRATION: To manually adjust the integrated front sensor with an external illuminance sensor

reference, which is traceable to a primary standards laboratory.

NOTE: Stand before proper Stand-Alone calibration can be performed, the display should warm-up for a minimum of

30 minutes. If Stand-Alone calibration is started before the monitor is warmed up, a warning will appear on-screen

(Figure A.1).

When Stand-Alone Calibration is executed, the message window will appear (Figure A.3) and the screen becomes dark for

about 10 seconds. Then ZERO CALIBRATION will start automatically.

NOTE: Please only use an USB optical sensor according to our speciﬁ cation.

Refer to the KEY MAP (Figure A.2) to adjust the settings for calibration.

Stand-Alone calibration should be performed in either portrait or landscape orientation.

NOTE: To start calibration without a computer, perform the following steps.

When the “NO SIGNAL” message appears on screen, press the “LEFT” and then “RIGHT” buttons and hold them

down simultaneously. The CALIBRATION menu will appear.

NOTE: When Stand-Alone Calibration is executed, the message window will appear (Figure A.3) and the screen becomes

dark about 10 seconds. It is not a malfunction.

Figure A.2

KEY MAP

UP/DOWN: Changes from setting to setting

LEFT/RIGHT: Changes the setting selection

(ie...SELF or COPY)

SELECT: Moves to the next step of calibration

EXIT: Moves back one step of calibration

Figure A.1

Figure A.3

CAUTION: Please use a properly-managed USB optical sensor. If there is any doubt about the result of the Stand-

Alone calibration result, please contact your supplier.

Скачать «NEC MD211G3» — 4,27 МБ СкачатьСкачиваний: 0

Инструкция NEC MD211G3 — страница 26

Другие руководства из этой категории