Инструкция MILWAUKEE HD18 MS — страница 11

Инструкция

PDF

2,05 МБ

Инструменты / Контрольно-измерительные приборы

LeoPro2116

Инструкция для MILWAUKEE HD18 MS на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

20 21

 HD18MS

........ 3600 min

-1

.. 135 x 20 mm

........... 1,6 mm

......... ø 50 mm

............ 51 mm

............ 18 V

........... 2,6 kg

............ 87 dB (A)

............ 98 dB (A)

........ < 2,5 m/s

........... 1,5 m/s

ENGLISH

TECHNICALDATA MetalSaw

No-load speed ..................................................................................

Saw blade dia. x hole dia..................................................................

Maximum cutting capacity:

Steel plate .....................................................................................

Metal pipe ......................................................................................

Sections .........................................................................................

Battery voltage..................................................................................

Weight according EPTA-Procedure 01/2003 ....................................

Noise/vibrationinformation

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

Sound power level (K = 3 dB(A)) ....................................................

Sound pressure level (K = 3 dB(A)) ................................................

Wearearprotectors!

Total vibration values (vector sum in the three axes) determined

according to EN 60745.

Vibration emission value a

...........................................................

Uncertainty K .................................................................................

WARNING!Readallsafetywarningsandallinstructions,

includingthosegivenintheaccompanyingbrochure. Failure

to follow the warnings and instructions may result in electric

shock, re and/or serious injury.

Saveallwarningsandinstructionsforfuturereference.

SAFETYINSTRUCTIONS

Danger: Keephandsawayfromcuttingareaandthe

blade.Keepyoursecondhandonauxiliaryhandle,ormotor

housing. If both hands are holding the saw, they cannot be cut by

the blade.

Donotreachunderneaththeworkpiece. The guard cannot

protect you from the blade below the workpiece.

Adjustthecuttingdepthtothethicknessoftheworkpiece.

Less than a full tooth of the blade teeth should be visible below

the workpiece.

Neverholdpiecebeingcutinyourhandsoracrossyourleg.

Securetheworkpiecetoastableplatform. It is important to

support the work properly to minimize body exposure, blade

binding, or loss of control.

Holdpowertoolbyinsulatedgrippingsurfaces,when

performinganoperationwherethecuttingaccessorymay

contacthiddenwiring.Cutting accessory contacting a „live“ wire

may make exposed metal parts of the power tool „live“ and could

give the operator an electric shock.

Whenrippingalwaysusearipfenceorstraightedgeguide.

This improves the accuracy of cut and reduces the chance of

blade binding.

Alwaysusebladeswithcorrectsizeandshape(diamond

versusround)ofarbourholes. Blades that do not match the

mounting hardware of the saw will run eccentrically, causing loss

of control.

Neverusedamagedorincorrectbladewashersorbolt. The

blade washers and bolt were specially designed for your saw, for

optimum performance and safety of operation.

Causes and operator prevention of kickback:

- kickback is a sudden reaction to a pinched, bound or misaligned

saw blade, causing an uncontrolled saw to lift up and out of the

workpiece toward the operator;

- when the blade is pinched or bound tightly by the kerf closing

down, the blade stalls and the motor reaction drives the unit

rapidly back toward the operator;

- if the blade becomes twisted or misaligned in the cut, the teeth

at the back edge of the blade can dig into the top surface of the

wood causing the blade to climb out of the kerf and jump back

toward the operator.

Kickback is the result of saw misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below.

Maintainarmgripwithbothhandsonthesawandposition

yourarmstoresistkickbackforces. Positionyourbodyto

eithersideoftheblade,butnotinlinewiththeblade.

Kickback could cause the saw to jump backwards, but kickback

forces can be controlled by the operator, if proper precautions are

taken.

Whenbladeisbinding,orwheninterruptingacutforany

reason,releasethetriggerandholdthesawmotionlessin

thematerialuntilthebladecomestoacompletestop.Never

attempttoremovethesawfromtheworkorpullthesaw

backwardwhilethebladeisinmotionorkickbackmayoccur.

Investigate and take corrective actions to eliminate the cause of

blade binding.

Whenrestartingasawintheworkpiece,centrethesawblade

inthekerfandcheckthatsawteetharenotengagedintothe

material. If saw blade is binding, it may walk up or kickback from

the workpiece as the saw is restarted.

Supportlargepanelstominimisetheriskofbladepinching

andkickback. Large panels tend to sag under their own weight.

Supports must be placed under the panel on both sides, near the

line of cut and near the edge of the panel.

Donotusedullordamagedblades. Unsharpened or

improperly set blades produce narrow kerf causing excessive

friction, blade binding and kickback.

Bladedepthandbeveladjustinglockingleversmustbetight

andsecurebeforemakingcut. If blade adjustment shifts while

cutting, it may cause binding and kickback.

Useextracautionwhenmakinga"plungecut"intoexisting

wallsorotherblindareas. The protruding blade may cut objects

that can cause kickback.

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745

and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,

with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase the exposure level over

the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is

running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,

keep the hands warm, organisation of work patterns.

Checklowerguardforproperclosingbeforeeachuse.Do

notoperatethesawiflowerguarddoesnotmovefreelyand

closeinstantly.Neverclamportiethelowerguardintothe

openposition. If saw is accidentally dropped, lower guard may

be bent. Raise the lower guard with the retracting handle and

make sure it moves freely and does not touch the blade or any

other part, in all angles and depths of cut.

Checktheoperationofthelowerguardspring.Iftheguard

andthespringarenotoperatingproperly,theymustbe

servicedbeforeuse. Lower guard may operate sluggishly due to

damaged parts, gummy deposits, or a build-up of debris.

Lowerguardshouldberetractedmanuallyonlyforspecial

cutssuchas"plungecuts"and"compoundcuts."Raise

lowerguardbyretractinghandleandassoonasbladeenters

thematerial,thelowerguardmustbereleased. For all other

sawing, the lower guard should operate automatically.

Alwaysobservethatthelowerguardiscoveringtheblade

beforeplacingsawdownonbenchoroor. An unprotected,

coasting blade will cause the saw to walk backwards, cutting

whatever is in its path. Be aware of the time it takes for the blade

to stop after switch is released.

Remove the battery pack before starting any work on the

machine.

Do not dispose of used battery packs in the household refuse or

by burning them. Milwaukee Distributors offer to retrieve old

batteries to protect our environment.

Do not store the battery pack together with metal objects (short

circuit risk).

Use only System C 18 chargers for charging System C 18 battery

packs. Do not use battery packs from other systems.

Never break open battery packs and chargers and store only in

dry rooms. Keep dry at all times.

The dust produced when using this tool may be harmful to health.

Do not inhale the dust. Wear a suitable dust protection mask.

Do not use saw blades not corresponding to the key data given in

these instructions for use.

Wearearprotectors. Exposure to noise can cause hearing loss.

Please do not use abrasion disks in this machine!

If the transparent saw blade cover is cracked or broken, it must be

replaced immediately by an authorised specialist workshop. The

machine must not be operated if the saw blade cover is defective

or missing!

SPECIFIEDCONDITIONSOFUSE

The Metal Saw may be used to cut lenghtways and mitre a variety

of metals, such as metal proles (UniStrut), pipes, metal studs,

channels, aluminium proles, metal sheets, etc.

Do not use this product in any other way as stated for normal use.

EC-DECLARATIONOFCONFORMITY

We declare under our sole responsibility that this product is in

conformity with the following standards or standardized

documents. EN 60745, EN 55014-1, EN 55014-2, in accordance

with the regulations 2006/42/EC, 2004/108/EC.

Winnenden, 2011-01-05

Rainer Kumpf

Manager Product Development

Authorized to compile the technical le

BATTERIES

Please take note of the specic information relating to Milwaukee

18V rechargeable batteries in the instruction manual for the

charger.

New battery packs reach full loading capacity after 4 - 5 chargings

and dischargings. Battery packs which have not been used for

some time should be recharged before use.

Temperatures in excess of 50°C (122°F) reduce the performance

of the battery pack. Avoid extended exposure to heat or sunshine

(risk of overheating).

The contacts of chargers and battery packs must be kept clean.

For an optimum life-time, after use, the battery packs have to be

fully charged.

ADVICEFOROPERATION

The machine switches off automatically if the motor is overloaded.

Allow it to cool, press the overload button and restart the

machine. If the overload protection switches off frequently, reduce

the cutting pressure or depth of cut.

MAINTENANCE

Use only Milwaukee accessories and Milwaukee spare parts.

Should components need to be replaced which have not been

described, please contact one of our Milwaukee service agents

(see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please

state the Article No. as well as the machine type printed on the

label and order the drawing at your local service agents or directly

at: Milwaukee Electric Tool, Max-Eyth-Straße 10,

D-71364 Winnenden, Germany.

SYMBOLS

Please read the instructions carefully before

starting the machine.

Always wear goggles when using the machine.

Remove the battery pack before starting any

work on the machine.

Do not dispose of electric tools together with

household waste material! In observance of

European Directive 2002/96/EC on waste

electrical and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their

life must be collected separately and returned

to an environmentally compatible recycling

facility.

ENGLISH

Скачать «MILWAUKEE HD18 MS» — 2,05 МБ СкачатьСкачиваний: 0

Инструкция MILWAUKEE HD18 MS — страница 11

Другие руководства из этой категории