
5
Производитель на свое усмотрение и без дополнительных уведомлений может менять комплектацию, внешний вид, страну производства, срок гарантии и технические характеристики модели.
Проверяйте в момент получения товара.
GBR USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Before the first use, check the device specifications and the power supply in your network.
It is not intended for industrial use.
For indoor use only. Use only for domestic purposes according to the instruction manual.
Do not use with damaged cord, plug or other injuries.
Keep the power cord away from sharp edges and hot surfaces.
Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Never drop or insert any object into any opening on this appliance.
Before use, make certain blades are aligned properly.
Do not place appliance on any surface while it is operating.
Do not use this appliance with a damaged or broken comb or with teeth missing from the blades as injury may occur.
NOTE: KEEP BLADES OILED!
BLADE ALIGNMENT
Your clipper was carefully examined to ensure that the blades were oiled and aligned before leaving our factory.
Blades must be realigned if they have been removed for cleaning or replacement.
To realign the blades, simply match the upper and bottom blades teeth up, point for point.
End of top blade teeth should be approximately 1.2 mm back from bottom blade. Compare your clipper blades with the sketch.
If blade alignment is incorrect, add a few drops of oil to the blades, switch on clipper for a few moments, switch off and unplug.
Loosen screws slightly and adjust. Tighten screws after blade is aligned.
LUBRICATION
To maintain your clipper in peak condition, the blades should be oiled every few haircuts.
Do not use hair oil, grease, oil mixed with kerosene or any solvent. As the solvent will evaporate and leave the thick oil which may slow down the blades motion.