Инструкция LOEWE Individual Edition — страница 10

Инструкция

PDF

12,70 МБ

Телевизоры / 3D очки / Проекторы

MilaBook43

Инструкция для LOEWE Individual Edition на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

- 10

First installation

Plug the antenna into the antenna input of the PIP tuner and connect the PIP

tuner output with the ANT-TV socket (Tuner 1). See illustration on page 5.

If a Digital Satellite Tuner 1 has been retroﬁ tted, connect your satellite antenna

system to the ANT-SAT socket.

If a Digital Satellite Tuner 2 has been retroﬁ tted, then connect one antenna

cable each, for example from the antenna switch or from the twin LNC, to both

SAT sockets.

Handling the fabric hose

Use the fabric hose included to

lay the mains cables, antenna

cables or cables from other elec-

tronic components systemati-

cally; then lead the hose with

the cables to the connection

boxes. This provides you with

an elegant solution when laying

cables.

The diameter of the fabric hose

increases when you push it together lengthwise (see illustration). This makes it

easier for you to push through cables with plugs.

Use of the binders

The enclosed binders are

intended to bind the connecting

cables together and ﬁ x the

cables to the mount of the table

stand (see ﬁ gure).

By pressing on the closure of

the binder, it can be opened

again.

Replace the connection cover on the TV set.

Using the common interface module

In order to be able to receive encrypted digital stations, the common interface

module (CI module) and the smartcard both have to be inserted into the corre-

sponding slot of your TV set. You can purchase the CI module and smartcard at

your specialist dealer. You can ﬁ nd the slot on the back of your TV set, see the

illustration on page 5.

1. Make sure the TV set is switched off with the mains switch on the set.

2. First push the smartcard into the CI module as far as it will go. Insert it so

that the side with the golden

contact chip faces the side of

the module printed with the

supplier‘s brand logo. Prin-

ted arrows indicate how to

insert the card. Also follow

the installation instructions

included with the smartcard.

3. Slide the CI module

carefully into the slot with

the contact side facing the front. The logo on the

common interface module should be visible.

Make sure the module is not twisted in the process.

Do not use force.

When the module locks, the eject button is pressed

outwards.

The CI module and the smartcard are not included in

the scope of delivery of this set; you can usually obtain

them at your specialist dealer.

Switching on

Press the mains switch, the red indicator on the set now lights

up (standby mode).

Switch on the set using the switch integrated in the indica-

tor. The green indicator on the set now lights up (for further

operating options see page 12).

Contact side

COMMON INTERFA

Eject button

CI module

)

Скачать «LOEWE Individual Edition» — 12,70 МБ СкачатьСкачиваний: 0

Инструкция LOEWE Individual Edition — страница 10

Другие руководства из этой категории