Инструкция LOEWE Individual 40 Slim Frame — страница 14

Инструкция

PDF

68,96 МБ

164

Телевизоры / 3D очки / Проекторы

LeoMaster5

Инструкция для LOEWE Individual 40 Slim Frame на русском языке. Документ можно использовать для ознакомления с информацией, относящейся к данной модели.

Инструкция представлена в формате PDF, просмотр, скачивание на компьютер, смартфон бесплатно. Возможность печати зависит от используемой программы и настроек устройства. Содержание, структура и объём документа могут различаться в зависимости от модели, версии и редакции руководства. Перед использованием рекомендуется убедиться, что инструкция соответствует вашей модели.

Individual 40-55 - 14 -

User guide

Connecting speakers

The TV set is delivered ex-factory without speakers. Various options

are available for connecting speakers to your set.

From the accessories set the Loewe system speaker Stereospeaker I

40/46/55 should be used that will have to be mounted below the TV

set and connected to the SYSTEM SPEAKER socket. See the assem-

bly instructions for the Loewe system speaker for further information.

If you want to use other speakers, two speakers can be connected

to the speaker connections (screw terminals) of the TV set (min. 4

Ohms / min. 20 W sinus).

Speaker systems or active speakers can be connected to the DIGITAL

AUDIO LINK connection.

For the connection and configuration of speaker systems or active

speakers refer to page 119.

Connecting external speakers to the speaker terminals

To connect the speakers, switch the TV set off with the mains switch

and pull out the mains plug.

The jumper plug on the system speaker connection must be plugged

or remain plugged.

You have connected and laid the connecting cables at the speakers.

Press on the locking mechanism of the spring clamp speaker terminal,

in order to open the clamp.

Push the deisolated connecting cables (max. 1.5 mm

) of the speakers

in the terminal of the same colour (red to red, black to black). Also

take notice of the connection labels of the speakers Right (R) and Left

(L) and the symbols “+” equals red and “–” equals black (see figure).

Make sure that the sheaths of the connecting cables are not acciden-

tally pinched.

When releasing the locking mechanism of the speaker terminal the

connecting cable will be clamped tight.

Individual 55 Front

left

Front

right

Individual 40 / 46

Front

left

Front

right

Rear views of the devices

Connecting the TV set to the Home network

You may link your TV set to the home network by a wired connection

(Ethernet, Powerline) or by a wireless radio connection (WLAN).

Please contact your specialist dealer for more information on Power-

line.

For the network adaptor configuration, see page 114.

Under no circumstances may the TV set be wired and at the

same time connected by a wireless connection to the same

network, e.g. router. This may cause severe operational faults!

Example for a wired connection

Connect the LAN socket of your TV set to the LAN switch/router of

your home network with a network cable (available from your dealer).

Example for a wireless connection

You can connect the TV set to your home network by a wireless radio

connection via the WLAN antenna inside the set.

LAN switch/router TV set

Homeserver,

e.g. PC

WLAN router TV set

Homeserver,

e.g. PC

Preparing the TV set

Скачать «LOEWE Individual 40 Slim Frame» — 68,96 МБ СкачатьСкачиваний: 0

Инструкция LOEWE Individual 40 Slim Frame — страница 14

Другие руководства из этой категории