Инструкция по эксплуатации LELIT PL60DOZ — страница 8

English

Steam: 17.

Check that the tank contains water

ATTENTION: the internal tank has a special floating device that controls the water level In case of lack of water all 5 pilot lights (17) on the keyboard (16) will flash automatically and at the same time the keyboard’s functions will be blocked Please fill the water tank with water (as described under Starting the machine points 3-5): the pilot lights (17) will go off confirming that the water level is suitable and the keyboard will be active again

NB: the water tank must be filled in with water till the MAX level indicated on the appliance body 18.

Switch on the steam group by pressing the steam main switch (6) (only if it has not been yet done): the pilot light (3)
goes on The machine is at the right temperature ready to make steam 19.

Place the cup/mug with the drink to be heated under the steam tube (10) 20.

Press the toggle steam switch (9) up paying attention that the steamer always remains immerse in the liquid to avoid possible hot drink sprays 21.

Press the toggle steam switch (9) down to stop steaming and remove the steam tube (10) from the cup/mug 22.

The steam tube (10) can become extremely hot so make sure to handle it only touching the rubber safety protection 23.

Clean the steam tube (10) accordingly with a normal damp cloth

Hot water: 24.

Check that the tank contains water

ATTENTION: the internal tank has a special floating device that controls the water level In case of lack of water all 5 pilot lights (17) on the keyboard (16) will flash automatically and at the same time the keyboard’s functions will be blocked Please fill the water tank with water (as described under Starting the machine points 3-5): the pilot lights (17) will go off confirming that the water level is suitable and the keyboard will be active again

NB: the water tank must be filled in with water till the MAX level indicated on the appliance body 25.

Wait till the hot water pilot light (21) comes on 26.

Place a mug under the hot water faucet (11) and press the hot water switch (20) up: the pilot light (21) confirms the starting Once you get the desired amount of hot water press the switch (20) down to stop dispensing 27.

After having taken hot water always check that there is still water in the tank and if it is necessary fill the water tank as indicated at point 24

ROUTINE MAINTENANCE AND PRECAUTIONS:

Clean up the steam tube (10) after every use

Use a normal damp cloth to clean the machine

Do not leave the machine outdoors

Do not immerse the machine in water

Use the machine only under adult control and keep it away from children’s reach

Do not wash filters and filter holder in the dishwasher

During normal functioning some parts of the appliance body can reach high temperatures: please handle with due caution!

Water softener included (inserted on the plastic tube inside the water tank): one way water softener for espresso machines It protects the machine from limestone residues It needs to be replaced according to the water hardness and consumption following the below table:

Water hardness Quantity 10°F 90 lt 20°F 45 lt 27°F 35 lt 35°F 23 lt 45°F 20 lt

NB: It’s is necessary to replace the resin filter as indicated above otherwise the limestone residues can damage the coffee machine (the warranty does not cover this type of damage). Technical data:

Power supply: 220-230V: 50Hz 220-230V: 60Hz Coffee heating element: 1000W Steam heating element: 1200W Coffee pump pressure: 12/15 bar Pump on coffee boiler (ULKA): 48W Pump on steam boiler (ULKA): 21W Water tank capacity: 2,7 litri Coffee boiler capacity: 250 ml – Steam boiler capacity: 400 ml Dimensions (HxLxP): 30x30x42 cm – Net Weight: 10,5 kg To be operated with ground coffee or coffee pods